J35a3 + 6spd manual. Which sensors need to be changed?

[98V6Accord]

I have a j35a3/rl pistons/j32a2 heads.

My accord currently has a j32a2/6 spd - stock CL-s ecu.

In order to make this j35a3 work with the 6 speed, I know some sensors need to be changed over to the manual ones. (Crank, cam etc)

If I switch to a piggyback or standalone will I still need to switch over?

If not, what all needs to be switched to drop the motor into my stock cl ecu/6 speed?

Any feedback is greatly appreciated!

 

[Devin Dean]

Hey man I'm no swap artist, but I know a lot of J35 swappers use the stock Odyssey ECU. I guess the 6GA's can't support the fuel needed at top end, CL-S might be the same.

As for the sensors, the J35 has a knock sensor unlike the 3.0/3.2 if I'm not mistaken.

I hope this helped a little, if I find more info I'll leave it here.