Halabeaster54
Well-Known Member
ok guys I have something out of the ordinary for sale today. Im posting it at this price for a very quick sale. This car has A LOT of money in it.
J36 Stroker cl type s 6 speed swapped 6th gen accord coupe.
Chris Miller tuned my old motor. John Visconti of EcuTek tuned my new motor. It made 345whp and 356.5lbs. This car is my daily driver and its reliable as hell. Car has 103k on the dash which is VERY low for a 98 (7k miles a year). none of the engine, drivetrain, suspension, ect is original. Everything has been upgraded/replaced. I am the second owner of the car, I bought it from an old man. I have 1,000s of pictures of it and I can supply any picture of it by request.
I am asking 7k obo. If there is any pictures that you need or want I probably have it and if you need any information about the car just shoot me a text, no calls. 480-658-8106.
My Mods
J35a3 Block
CL Type S 6 Speed Transmission
AEM EMS Series 2 Standalone ECU
02 4cyl 5spd Clutch Pedals
08 TL Type S Clutch Master Cylinder
P2R 6 Puck Unsprung
JTC Customs Race Spec Shortshifter
Ralco RZ Pulley Set
9:5:1 Comp Pistons
J32a2 Type S Heads
Forged J37 Acura MDX Crankshaft
Forged J37 Acura MDX Rods
NGK Iridium IX Plugs (best plugs you can buy)
Bisimoto Valve Springs
J32a2 Cams
J37 Acura TL SH-AWD Magnesium Manifold
Ported Lower Intake Manifold
08 J35 Accord Honda Manifold Cover
P2R j37 Fuel Rails
P2R Gaskets (every gasket they offer for my car)
P2R Throttle Body Spacer
P2R egr block off plate
Ingalls Stiffy Torque Damper
Mishimoto X-Line Triple Core Radiator for the S2000
Mishimoto s2000 Slim Fan Shroud
Mishimoto Aluminum Radiator Hoses
AEM Digital Wideband
04 Odyssey Alternator
Innovative j32a2 Engine mounts
Walboro 255lph fuel pump
HKS Oil Filter
Royal Purple HPR 10-30 Oil
Custom Mendrel Bent Exhaust
Suspension/Brakes:
BBS 18x8.5 CH-R Evo X MR Limited Edition
Work Euroline Type N 18x9 +30
F2 type 1 coilovers
Comptech Front Sway Bar
Progress 24mm Rear Sway Bar
Brand new slotted and drilled rotors
Hawk HPS Pads
Megan Front strut bar
225/40/18 General G-Max
Rolled and pulled fenders
Moog Endlinks
*Just got out of the shop for all major maintenance*
-Brand New upgraded bushings to hold the power/torque
-New tire rods
-New Ball Joints
-Suspension Bushings
-Oil Change
-Alternator
-Tensioner
-Bearings
-Timing Belt
-Water Pump
Interior:
OEM Black Leather interior 9.5/10
OEM Woodgrain trim
2002 Accord Coupe Headrests (more sporty)
Alpine Single Din head unit
Pioneer speakers
Exterior:
2002 Front End conversion
OEM Front lip
Black housing headlights with clear strips
Eyelids optional (not on the car at this time)
Carbon Fiber Trunk
Carbon Fiber e46 M3 trunk lip
This is the Shop where all the work is done. M.R. Performance in Westbury, NY. As you can tell this is not an average shop, they build Ferraris, GTRs, Supras, STis, ect and my accord. and yes that is a LS3 swapped FD RX-7 in the bottom right.
Thanks Guys!
J36 Stroker cl type s 6 speed swapped 6th gen accord coupe.
Chris Miller tuned my old motor. John Visconti of EcuTek tuned my new motor. It made 345whp and 356.5lbs. This car is my daily driver and its reliable as hell. Car has 103k on the dash which is VERY low for a 98 (7k miles a year). none of the engine, drivetrain, suspension, ect is original. Everything has been upgraded/replaced. I am the second owner of the car, I bought it from an old man. I have 1,000s of pictures of it and I can supply any picture of it by request.
I am asking 7k obo. If there is any pictures that you need or want I probably have it and if you need any information about the car just shoot me a text, no calls. 480-658-8106.
My Mods
J35a3 Block
CL Type S 6 Speed Transmission
AEM EMS Series 2 Standalone ECU
02 4cyl 5spd Clutch Pedals
08 TL Type S Clutch Master Cylinder
P2R 6 Puck Unsprung
JTC Customs Race Spec Shortshifter
Ralco RZ Pulley Set
9:5:1 Comp Pistons
J32a2 Type S Heads
Forged J37 Acura MDX Crankshaft
Forged J37 Acura MDX Rods
NGK Iridium IX Plugs (best plugs you can buy)
Bisimoto Valve Springs
J32a2 Cams
J37 Acura TL SH-AWD Magnesium Manifold
Ported Lower Intake Manifold
08 J35 Accord Honda Manifold Cover
P2R j37 Fuel Rails
P2R Gaskets (every gasket they offer for my car)
P2R Throttle Body Spacer
P2R egr block off plate
Ingalls Stiffy Torque Damper
Mishimoto X-Line Triple Core Radiator for the S2000
Mishimoto s2000 Slim Fan Shroud
Mishimoto Aluminum Radiator Hoses
AEM Digital Wideband
04 Odyssey Alternator
Innovative j32a2 Engine mounts
Walboro 255lph fuel pump
HKS Oil Filter
Royal Purple HPR 10-30 Oil
Custom Mendrel Bent Exhaust
Suspension/Brakes:
BBS 18x8.5 CH-R Evo X MR Limited Edition
Work Euroline Type N 18x9 +30
F2 type 1 coilovers
Comptech Front Sway Bar
Progress 24mm Rear Sway Bar
Brand new slotted and drilled rotors
Hawk HPS Pads
Megan Front strut bar
225/40/18 General G-Max
Rolled and pulled fenders
Moog Endlinks
*Just got out of the shop for all major maintenance*
-Brand New upgraded bushings to hold the power/torque
-New tire rods
-New Ball Joints
-Suspension Bushings
-Oil Change
-Alternator
-Tensioner
-Bearings
-Timing Belt
-Water Pump
Interior:
OEM Black Leather interior 9.5/10
OEM Woodgrain trim
2002 Accord Coupe Headrests (more sporty)
Alpine Single Din head unit
Pioneer speakers
Exterior:
2002 Front End conversion
OEM Front lip
Black housing headlights with clear strips
Eyelids optional (not on the car at this time)
Carbon Fiber Trunk
Carbon Fiber e46 M3 trunk lip
This is the Shop where all the work is done. M.R. Performance in Westbury, NY. As you can tell this is not an average shop, they build Ferraris, GTRs, Supras, STis, ect and my accord. and yes that is a LS3 swapped FD RX-7 in the bottom right.
Thanks Guys!
