JV6 Silver 2000 Accord Coupe V6 EX-L

[JV6]

I like the wirings on your grounds being not cluttered. They make me want to work on mine.

Good luck on finishing up your retros.

Btw, did everything work out okay on your debadging work?

Thanks, yup I was following up on the diy grounding upgrade last year and decided to give it a go. My lights don't dim much anymore and I noticed my lights are bit brighter. As for the debadging, I only removed the "Accord" emblem so far and haven't touch the V6 yet. I might leave the V6 there for now. I haven't taken a clear shot yet which I'm suppose to so I can show.

 

[Sil2DrV6]

That's nice that you can tell the difference. I really should do this when I get a chance.

Got it. I"m really hoping that "Goo-gone" (if that was what you were using) didn't mess up your paint though... (Hope you've read my reply on "what'd you do to your--" thread...)

 

[PalmenatoR]

super clean !!

 

[CG3Speer53]

Amazing Car I'm on the fast track to getting mine done asap. but less v6 and more f23a1

 

[OldNo7_CG2]

What's your ground to fender height front and rear with your TLs?

 

[JV6]

Thank for the feed guys! Appreciated

Sorry Ive never measure it before from ground to fender, its pretty low sometimes and I play around with the ride height quite a bit with spacers. The car current height right now is with the picture u see me parking on the beach, not sure which height your looking for since majority of the pictures are at different height lol. When I have time I'll check it out for you since I work 70+ hours a week. As for my upper control arm, it taps slightly just a little. Not really noticeable unless I hit an obvious bump on street.

As for updates for my car, front bridgestone turanza tires are going to be replaced soon. Had them on my car since July 2011 with good alighnment

 

[JV6]

Just another update, added canucks playoff car flags lol. Dat dirty black roof reflection

Edited: 05/05/13

Raised my car up .5 inch

 

[JV6]

A little new look to my oem+ addition, added 15mm ichiba V2 to the rear + another 5mm HnR on top of it

 

[dharding413]

A little new look to my oem+ addition, added 15mm ichiba V2 to the rear + another 5mm HnR on top of it

Looks good, I'm about to do the same exact thing. Just waiting to get the rears rolled

 

[bairdandrew77]

Looks great. I want to get OEM lips on my car and drop it too, but my family drives it a lot and I'm scared of something getting damaged