Looking where I can get an 02 sensor

[accordman1]

Does anyone know where I can find an 02 sensor for my down pipe. The one I have someone had it welded in and it fell off while doing work on car. There is no threads left on it so I cannot get it back in. Since going to Honda to get one costs so much. Do I have to get a honda 02 sensor directly from honda or is there other places I can get them for a lot cheaper but won't throw a check engine light.

 

[SeanXtec]

hondaautomotiveparts.com or other honda oem part shops online

 

[accordman1]

hondaautomotiveparts.com or other honda oem part shops online

Are both 02 sensors the one that plugs in catalytic converter and the one that plugs in downpipe the same size. I was looking on that site and they only showed it for plugging in front of the headers and catalytic converter.

 

[DarkSideAccord]

the sensors are the same for both secondary and primary... however, the wiring length is different... check eGay for the sensors... NTK is a good brand... do not get bosch

 

[finch13]

Also go to the parts store and pick up a new bung or go the an exhaust shop and have them weld in a new bung.

 

[EnjoiPugs]

Make sure you don't need the ulev o2 sensor. Those are atleast 120 bucks. If you have the f23a1 though I have an extra sensor I will sell you for 30 bucks shipped. I bought it not knowing I needed a special ulev one. I had it in for like a 5 miles only. PM me if you want this.

 

[accordman1]

Also go to the parts store and pick up a new bung or go the an exhaust shop and have them weld in a new bung.

What is a bung? Not sure is I know that term I can guess what it is but I do not know.

 

[finch13]

It's the ring with threads in it welded to the pipe, it's what the sensor screws into. You said it was welded on and fell off... kinda seems like you may need a new one

 

[accordman1]

the sensors are the same for both secondary and primary... however, the wiring length is different... check eGay for the sensors... NTK is a good brand... do not get bosch

so I could use a longer 02 sensor for the downpipe? The wire would just be longer but it would fit fine?

 

[CHID0]

the sensors are the same for both secondary and primary... however, the wiring length is different... check eGay for the sensors... NTK is a good brand... do not get bosch

Whats wrong with bosch?