finch13
Well-Known Member
I need to remove + clean my TB b/c my gas pedal sticks first thing on cold mornings (OK after that). I see these steps at the end of Honda's service bulletin for 2.3L throttle body cleaning - "Adjust the cruise control actuator cable" and "Adjust the throttle cable (refer to shop manual)." Did any of you have to do this after reinstalling the cables?
No. You remove the cable ends from the spring loaded pulley, and then unbolt the cable tensioner and bracket from the throttle body. Pull if off to the side and out of the way, if you didn't accidentally turn the adjuster while working on the car, it's in the exact same spot it was before.