more drift car modssssssss (updated with manifold progress)

x5carl3tMurd3rx

Well-Known Member
Joined
Feb 23, 2009
Posts
3,628
Reaction score
9
Location
LO.CO. va
few pics of the progress I made on the drift car yesterday. Hoping to get alot more done today.

525115_4466505271938_1189557347_n.jpg


Harness bar so I can get some harnesses and not bounce around in my seat since I don't have the tools to build a cage yet.

482420_4466505071933_1393394200_n.jpg

35454_4466505711949_749544631_n.jpg

563262_4466505471943_1002737753_n.jpg


Chase Bays braided power steering kit, no more leaks or collapsed hoses to **** up my steering like I did at 100 dod.

That's it for now. expect some more to come later tonight after today's progress. Reaaaallllyyyy enjoying having a lens for my dslr again.

few pics of the manifold progress. Gotta pick up some 16" ties tomorrow to be able to wrap the collector and the last little bits I couldn't get to on those two runners. stay tunes for updates.

488062_4471826684970_884918508_n.jpg

600121_4471827044979_1200593283_n.jpg



Updated pics from tonight.
734909_4489687611482_1804964342_n.jpg

Finally redid my ghetto distribution block (three ring terminals with a bolt through them) New wire ran to the starter and to the fusebox too.

17630_4489693851638_1535563310_n.jpg

new oil drain line. Earl's an fittings with nylon braided hose.

548792_4489698931765_1908618886_n.jpg

finally finished wrapping the manifold then sealed it with the DEI high temp sealant.

thats all the pics I took should have the car running sometime soon I'll get some dslr pics at some point hahaha
 
Last edited:

x5carl3tMurd3rx

Well-Known Member
Joined
Feb 23, 2009
Posts
3,628
Reaction score
9
Location
LO.CO. va
Re: more drift car modssssssss

ya I'm pretty pleased with them. we'll see how durable the nylon braid is though. its more flexible then the braided stainless is though, so its nicer to work with.

pretty much the same generic ebay harness bar you have isn't it?
 
Back
Top