its cake. like greg said, just jack one side up and take off the two bolts you need to, then you can just loosen the rest, thats what i did. while theyre loose, put the one side of the bar on, then move the other side around until it lines up. then tighten all the bolts back down and youre set.
neuspeed strut tie bar does not fit =[
- Thread starter leothefishee
- Start date
leothefishee
Well-Known Member
- Joined
- Feb 18, 2008
- Posts
- 48
- Reaction score
- 0
That is exactly how much mine is off by, I will try that. Did u use a rubber mallet?
How do u exactly move them around? do u grab the wheel and shake it around? or do you grab the spring?
Dinzdale40
Large Member
heres exactly what i used....the key is the weight that they put in the head
its the 2lb one i think....
http://www.sears.com/shc/s/p_10153_12605_00938359000P
its the 2lb one i think....
http://www.sears.com/shc/s/p_10153_12605_00938359000P
Last edited:
BlkCurrantKord
Super Moderator
When you drop the spring assembly, put the bar over the appropriate holes, push the spring back up through the holes, put the bolts on.
leothefishee
Well-Known Member
- Joined
- Feb 18, 2008
- Posts
- 48
- Reaction score
- 0
So ya, due to lots of school work, I finally get to get this anther attempt, and im excited to say it worked!
I jacked up the car and remove the wheel, I couldn't move the strut cuz i can't get to the bolts under the car. So I tried attach one side of the strut bar on first, and then pushing it, it went a little bit, but not much. Then I used some WD-40, on both side of bolts, and it went in smoothly. IT was an awesome feeling. Thanks for everyone who helped me!
I jacked up the car and remove the wheel, I couldn't move the strut cuz i can't get to the bolts under the car. So I tried attach one side of the strut bar on first, and then pushing it, it went a little bit, but not much. Then I used some WD-40, on both side of bolts, and it went in smoothly. IT was an awesome feeling. Thanks for everyone who helped me!
A-cord
Well-Known Member
so how does the tie bar feel? anything?
GoldnKnight22
TWM:TLMF
wat. all you used was WD-40 and it went in?
................. /facepalm
................. /facepalm
MikeyMike
Well-Known Member
upper or lower tie bar. im still trying to find someone whose used their lower tie bar b4 i buy it
GoldnKnight22
TWM:TLMF
^^^ he meant regular good ole' strut bar. (upper)
