RedRyder
Save the manuals
Take a look and see how your license plate light is mounted. Mine is not mounted the factory way, so I had to buy a special bulb that had the LED’s turned at 45 degree angle for them to actually reflect onto the plate.
Noob - Need some help with mods
- Thread starter KombatVirus
- Start date
fastflyinaccord
Well-Known Member
^don't make it more complicated than it already has to be 
SykVSyx
Well-Known Member
Daniel,
I have an LED in my licence plate light as well, it's a simple swap to do.
If you had the bulb already we could do it tonight.
Jeff(Jephu) has some great bulbs and the prices are good, so you may want to consider those for both the footwell and licence plate.
I have an LED in my licence plate light as well, it's a simple swap to do.
If you had the bulb already we could do it tonight.
Jeff(Jephu) has some great bulbs and the prices are good, so you may want to consider those for both the footwell and licence plate.
metrick1235
Well-Known Member
I did all my LED's from Superbrightleds.com and love them. I did everything, doors, dash, trunk, and overhead lights.. and it was less than 40.00. I have had them in for a bout 3 years now and nothing has blown out.. They also sell LED strip lighting and some waterproof stuff if you do outside things.. its a little more expensive than EBay but you get what you pay for..
Off topic but i saw these and seem interesting...
http://www.superbrightleds.com/more...-power-cob-led-auxiliary-light-kit/1322/3044/
Off topic but i saw these and seem interesting...
http://www.superbrightleds.com/more...-power-cob-led-auxiliary-light-kit/1322/3044/
RedRyder
Save the manuals
^don't make it more complicated than it already has to be
Haha
KombatVirus
Well-Known Member
Going to revive this thread with some more questions
1) I have searched, but cant find any guides on replacing the map lights. Do they take the 194 type bulbs? Was looking at these: link
2) Are there any guides for replacing the dome lights? Again I searched, have not found any guides. Also, are these bulbs the correct type and how many of them do I need for the dome light? - LINK
1) I have searched, but cant find any guides on replacing the map lights. Do they take the 194 type bulbs? Was looking at these: link
2) Are there any guides for replacing the dome lights? Again I searched, have not found any guides. Also, are these bulbs the correct type and how many of them do I need for the dome light? - LINK
Valet
IS300 SX > Accord
Yes that's correct for domes. If you had searched you would have found the answer quickly. I know because I had to a couple months ago.
Don't pay $15 for that when you can get like 4 on eBay for $5.
Don't pay $15 for that when you can get like 4 on eBay for $5.
RedRyder
Save the manuals
I thought the longest you could go for domes was like 37mm or 39mm? I forget what I bought.
Valet
IS300 SX > Accord
Whoops I didn't even notice that. I don't remember what it is exactly then. What you said is probably right though
KombatVirus
Well-Known Member
So how many of the lights go into the domes, just 1?
I have searched and could not find the guides, could you please provide links? Thank you
I have searched and could not find the guides, could you please provide links? Thank you
