power locks won't work

[malsr]

My power locks are not actuating. Power locks fuse is good. The switches will not move the locks up or down. If it was one lock not working I would say its an actuator. However, all 4 locks are not responding at all. Is there some kind of a master actuator somewhere?

98, lx, 4dr, 2.3

 

[malsr]

Could removing the ecu power fuse and putting it back in reset my system?

 

[Sketch o5]

thatll reset the system, but idk if itll make them work. and you gotta keep it out for like 5 minutes or so.

 

[malsr]

I'll try it tomorrow and report back. Why the 5 minutes...I've heard that elsewhere as well??

 

[malsr]

by the way, where is the ECU located??

 

[Sketch o5]

front of the dash, at the bottom, and in the center. the ecu fuse needs to be held out for a while so that the ecu completely loses all its info. you could also just unhook the negative battery cable for about the same amount of time.

the edit button is located in the lower right, too. next to quote.

 

[HondaLuver83]

your powerwindow circuit board could be out too.

 

[malsr]

Did a fuse reset procedure with a dealer tech...problem fixed.