Power steering issue

[Pudge49902]

So i have a leak coming from my power steering pressure hose. There are 2 small holes on the hose. So small it looks like a needle make the holes. My question is should i replace the line or can i seal it with something?

 

[xci.ed6]

Depends, sometimes you can splice, got pictures?

 

[001Stunna]

Replace the hose, especially if its on the high pressure hose.

 

[Pudge49902]

The hole is so little its crazy. I was gonna use silicone or something to cover the hole

 

[BlkCurrantKord]

Just replace it

 

[chrismister2k1]

Same problems just happened to me had to replace the hose

 

[xci.ed6]

You can repair the hose too. Here's a DIY I found on google, very easy and can save some $$. I do this at work, it's usually easier than getting the prebent aftermarket **** to fit correctly.

http://www.r3vlimited.com/board/showthread.php?t=238398

Just make sure you get the correct hose & clamps if it's the pressure line.

 

[chrismister2k1]

Same problems just happened to me had to replace the hose

 

[Pudge49902]

How hard is it to replace the hose?

 

[chrismister2k1]

I paid to put it in cause it runs inbetween the subframe and rack and there was barely and room to do it so I figured it would of taken forever to do on the ground on my back. They charged me 150 to replace it