RedRyder
Save the manuals
Re: RR's 3.2L '99 EX-L Coupe 6MT
^seriously? Ugh that makes me sick.
Is he parting it out?
^seriously? Ugh that makes me sick.
Is he parting it out?
RR's '99 coupe EX-L
- Thread starter RedRyder
- Start date
Varnell
Well-Known Member
Re: RR's 3.2L '99 EX-L Coupe 6MT
I haven't looked since. He says he doesn't plan on swapping everything over. I'd love some of those parts. I'm not actually an Azine member, but let me know if you see that he is.
I haven't looked since. He says he doesn't plan on swapping everything over. I'd love some of those parts. I'm not actually an Azine member, but let me know if you see that he is.
Varnell
Well-Known Member
Re: RR's 3.2L '99 EX-L Coupe 6MT
Nice front page pic! I've honestly never liked the trunk lid lip until just now. Is that a particular one? It flows perfectly.
Nice front page pic! I've honestly never liked the trunk lid lip until just now. Is that a particular one? It flows perfectly.
RedRyder
Save the manuals
Re: RR's 3.2L '99 EX-L Coupe 6MT
^Thanks, I didn't take it lol. When I was looking for a trunk lip all the "M3 style" ones were just long strips that were cut to length for different trunks, they didn't have finished edges. So I found this one by Spoilerking and it's quality made, and I like how it adds some dimension to the back with it being slightly rounded.
Ebay link:
http://www.ebay.com/itm/Rear-Trunk-...ash=item43e62ae51e:g:mP8AAOSwQJhUkPyk&vxp=mtr
^Thanks, I didn't take it lol. When I was looking for a trunk lip all the "M3 style" ones were just long strips that were cut to length for different trunks, they didn't have finished edges. So I found this one by Spoilerking and it's quality made, and I like how it adds some dimension to the back with it being slightly rounded.
Ebay link:
http://www.ebay.com/itm/Rear-Trunk-...ash=item43e62ae51e:g:mP8AAOSwQJhUkPyk&vxp=mtr
As an eBay Associate we earn from qualifying purchases.
SykVSyx
Well-Known Member
Re: RR's 3.2L '99 EX-L Coupe 6MT
Saw the Featured Ride pic this time around and was like,
Saw the Featured Ride pic this time around and was like,
kn0x47
Senior Member
Re: RR's 3.2L '99 EX-L Coupe 6MT
^tru dat.
always a good looking car and a pretty good photo of it too even if i do say so myself
^tru dat.
always a good looking car and a pretty good photo of it too even if i do say so myself
SykVSyx
Well-Known Member
Re: RR's 3.2L '99 EX-L Coupe 6MT
always a good looking car and a pretty good photo of it too even if i do say so myself
ThatDesiKid
Well-Known Member
Re: RR's 3.2L '99 EX-L Coupe 6MT
Sent from my XT1080 using Tapatalk
Starting my Psych rewatch right now!
Sent from my XT1080 using Tapatalk
RedRyder
Save the manuals
Re: RR's 3.2L '99 coupe 6MT
Back on the PFM project, disassembled them last night. Just went really slow, scariest part was removing the mirror glass. The joints are near the top, so it's best to hold at the bottom and pull up. You need to have your fingers spread out though to distribute the force, I didn't do it right on the second and cracked the glass (because it was bending). Doesn't matter since I'm replacing it with heated glass from the USDM model, but reminds me to be careful when I remove that.
Basically if you're having to use a lot of force and you not nearing the popping of the joints separating, you're doing it wrong.
Dropping the housings/sails off for paint this week.
Back on the PFM project, disassembled them last night. Just went really slow, scariest part was removing the mirror glass. The joints are near the top, so it's best to hold at the bottom and pull up. You need to have your fingers spread out though to distribute the force, I didn't do it right on the second and cracked the glass (because it was bending). Doesn't matter since I'm replacing it with heated glass from the USDM model, but reminds me to be careful when I remove that.
Basically if you're having to use a lot of force and you not nearing the popping of the joints separating, you're doing it wrong.Dropping the housings/sails off for paint this week.
Last edited:
SykVSyx
Well-Known Member
Re: RR's 3.2L '99 coupe 6MT
PFM are from what car?
How much did they cost you?
Will be a nice upgrade, how much is paint going to cost?
PFM are from what car?
How much did they cost you?
Will be a nice upgrade, how much is paint going to cost?
