ryan s
they dont think it
Here's a bunch of things that I've had for quite a while now. It's time for some changes, and most of this stuff is literally gathering dust.
Condition is noted in the descriptions. Please also notice the pics show more than just what's in the center of the frame.
Shipping is actual, paid by the buyer, either by FedEx or USPS. International is possible for extra. Paypal fees included in price. Let me know your ZIP and I can get a total.
Anyone who wants this stuff can also pay now (or put down a deposit if I know you) and I'll bring whatever to Chicago on the 24th. My reputation proceedeth me
Trades:
Cash or Paypal funds
6GA products:
These are made for the 4 cylinders. They could use a little more modding to sit flush with the CC bezel. Some very fine scuffs from use. You'll probably not see another pair for sale. The lock knobs stay till I sell the car in case I get another.
2. BNIB (both) Gauge rings (SOLD) and bezel (SOLD) $25 for rings, $10 for bezel
Here is another thing you'll have a heck of a time finding. Chris (RedRyder) has these in his sig. As I recall, these were like $45 when I bought them 3-4 years ago. 3M tape on the back. It's a “brushed” aluminum finish.
3. DC Sports strut tower bar $40 SOLD
It's chromed, but flaking and rusting. Will need to be refinished. Hit it with a scuff pad and a wire wheel then paint it the color of your choice. Simple, really These don't come up often anymore.
Car audio/electronics:
Long shots but I'll try here first before CL/ebay...
This amp has tubes inside (see sig...there are 4 inside this one) which is supposed to give it a “warm” sound. Whether it does or not, I can't affirm...but my working 754 sounds fantastic. The crossover section in this amp is great...you can “run active” off it.
Channel 4 does NOT work. Bridged, 3+4 work but there is alternator whine. Send it to Zed Audio and get it repaired for $100-125. I was in touch with Steve Mantz about fixing it, and he said he would touch the paint up, fix the channel, replace the terminal blocks and screws, and give the RCA inputs a cleaning.
Rated at a pretty conservative 70 x 4 @ 4 or 200 x 2 @ 4...the manual has the 70 crossed off and 100 watts is written in
This amp is NOT mint but not terrible. Once it's touched up, it'd look pretty good.
2. Planet Audio P2100 2 or 1 channel amp $100
Rated 100 x 2 @4, 200 x 2 @ 2, or 300 x 1 @ 4. Pretty strong amp, made by Zed Audio. Only uses one 25A fuse!
Fully functional. Notice the condition in the pics. There are a couple small nicks on the “rear” heat sink, but in general, a strong 8/10 condition-wise.
3. MA Audio M686i 2 or 1 channel amp TRADED
Rated the same as the P2100 but makes 400w @ 4 bridged. Very decent amp for the price, and I'm the original owner. Even on 2 12s sealed, you could hear it almost a block away (high school...).
Cosmetics are about 6/10...the chromed side plates are rusting and there are numerous scuffs on it.
Comes with all screws and wrenches and box.
4. AudioControl 24XS crossover SOLD
It's not in great cosmetic shape but works fine.
Install stuff...
Stinger HPM 4ga in 4x 8ga out distribution block BNIB SOLD
Knu Konceptz 4ga in 4x 8ga out distro block SOLD
NIB old school MTX fused distro block SOLD
NIB KK Karma RCA splitters $3/ea. Used for testing once. 1 female to 2 male.
(2) KK eKo 1 meter RCAs $2/ea. Used. SOLD
(1) Streetwires ZN2 1 meter RCA $1. Used. SOLD
HID:
2. (6) Genuine Nissan 300ZX lenses.
One pair is mint $50. (One lens is JDM but simply has a lip around the edge).
Four lenses are nicked/chipped $10/each. Three of them have light nicks which you can only see when looking at the lens, one has part of the bottom chipped off...I don't think you could see it once in a lens holder.
Go to HIDPlanet and research these and what they swap into. FX35/G35, RX330...off the top of my head. Sharp cutoff + color band is what you'll get.
3. Genuine BMW E46 Bi-Xenon shrouds $20.
Partially trimmed, should be painted. “Same side” shrouds.
Notice how they fit inside 6GA reflectors below.
Random:
Factory take-off, box is for optional wood knob. I don't know if this fits TL/Lude shifters.
2. Near-mint OEM Stanley headlight lenses $75
Now, why are these in the “random” section?
Reflectors were cut for retro. Blackhousings have many, many scratches due to bad primer (you can have if you want). Amber strips lightly tinted. Housings have a little trimmed off the low beam area due to projectors. Think there's no boots for the low beams.
That said, you can have everything if you want, but shipping will be more expensive. I don't know if I have a box that will fit them, so there's another possible $5 added to shipping.
Pics if you're serious...as in...make it worth my time to dig them out, get my camera set up, all that. They are buried, but I can assure you these lenses (from a 2002 6GA) are 9.8/10 condition. If I didn't live in a place where I had to scrape my headlights in winter, they would be on the car.
Condition is noted in the descriptions. Please also notice the pics show more than just what's in the center of the frame.
Shipping is actual, paid by the buyer, either by FedEx or USPS. International is possible for extra. Paypal fees included in price. Let me know your ZIP and I can get a total.
Anyone who wants this stuff can also pay now (or put down a deposit if I know you) and I'll bring whatever to Chicago on the 24th. My reputation proceedeth me
Trades:
Cash or Paypal funds
6GA products:
- V6P polished climate control knobs SOLD $25
These are made for the 4 cylinders. They could use a little more modding to sit flush with the CC bezel. Some very fine scuffs from use. You'll probably not see another pair for sale. The lock knobs stay till I sell the car in case I get another.
2. BNIB (both) Gauge rings (SOLD) and bezel (SOLD) $25 for rings, $10 for bezel
Here is another thing you'll have a heck of a time finding. Chris (RedRyder) has these in his sig. As I recall, these were like $45 when I bought them 3-4 years ago. 3M tape on the back. It's a “brushed” aluminum finish.
3. DC Sports strut tower bar $40 SOLD
It's chromed, but flaking and rusting. Will need to be refinished. Hit it with a scuff pad and a wire wheel then paint it the color of your choice. Simple, really
These don't come up often anymore.Car audio/electronics:
Long shots but I'll try here first before CL/ebay...
- Planet Audio HVT754 4 channel vacuum tube amp SOLD
This amp has tubes inside (see sig...there are 4 inside this one) which is supposed to give it a “warm” sound. Whether it does or not, I can't affirm...but my working 754 sounds fantastic. The crossover section in this amp is great...you can “run active” off it.
Channel 4 does NOT work. Bridged, 3+4 work but there is alternator whine. Send it to Zed Audio and get it repaired for $100-125. I was in touch with Steve Mantz about fixing it, and he said he would touch the paint up, fix the channel, replace the terminal blocks and screws, and give the RCA inputs a cleaning.
Rated at a pretty conservative 70 x 4 @ 4 or 200 x 2 @ 4...the manual has the 70 crossed off and 100 watts is written in
This amp is NOT mint but not terrible. Once it's touched up, it'd look pretty good.
2. Planet Audio P2100 2 or 1 channel amp $100
Rated 100 x 2 @4, 200 x 2 @ 2, or 300 x 1 @ 4. Pretty strong amp, made by Zed Audio. Only uses one 25A fuse!
Fully functional. Notice the condition in the pics. There are a couple small nicks on the “rear” heat sink, but in general, a strong 8/10 condition-wise.
3. MA Audio M686i 2 or 1 channel amp TRADED
Rated the same as the P2100 but makes 400w @ 4 bridged. Very decent amp for the price, and I'm the original owner. Even on 2 12s sealed, you could hear it almost a block away (high school...
).Cosmetics are about 6/10...the chromed side plates are rusting and there are numerous scuffs on it.
Comes with all screws and wrenches and box.
4. AudioControl 24XS crossover SOLD
It's not in great cosmetic shape but works fine.
Install stuff...
Stinger HPM 4ga in 4x 8ga out distribution block BNIB SOLD
Knu Konceptz 4ga in 4x 8ga out distro block SOLD
NIB old school MTX fused distro block SOLD
NIB KK Karma RCA splitters $3/ea. Used for testing once. 1 female to 2 male.
(2) KK eKo 1 meter RCAs $2/ea. Used. SOLD
(1) Streetwires ZN2 1 meter RCA $1. Used. SOLD
HID:
- D2S Philips “test” bulb $15. Heavily used, unknown hours. Perfect for testing projectors/mods/shields/lenses/etc.
2. (6) Genuine Nissan 300ZX lenses.
One pair is mint $50. (One lens is JDM but simply has a lip around the edge).
Four lenses are nicked/chipped $10/each. Three of them have light nicks which you can only see when looking at the lens, one has part of the bottom chipped off...I don't think you could see it once in a lens holder.
Go to HIDPlanet and research these and what they swap into. FX35/G35, RX330...off the top of my head. Sharp cutoff + color band is what you'll get.
3. Genuine BMW E46 Bi-Xenon shrouds $20.
Partially trimmed, should be painted. “Same side” shrouds.
Notice how they fit inside 6GA reflectors below.
Random:
- Mint 05+ RL OEM shift knob $15.
Factory take-off, box is for optional wood knob. I don't know if this fits TL/Lude shifters.
2. Near-mint OEM Stanley headlight lenses $75
Now, why are these in the “random” section?
Reflectors were cut for retro. Blackhousings have many, many scratches due to bad primer (you can have if you want). Amber strips lightly tinted. Housings have a little trimmed off the low beam area due to projectors. Think there's no boots for the low beams.
That said, you can have everything if you want, but shipping will be more expensive. I don't know if I have a box that will fit them, so there's another possible $5 added to shipping.
Pics if you're serious...as in...make it worth my time to dig them out, get my camera set up, all that. They are buried, but I can assure you these lenses (from a 2002 6GA) are 9.8/10 condition. If I didn't live in a place where I had to scrape my headlights in winter, they would be on the car.
Last edited:
i dont know the weight exactly, but its less than 10lbs and shipping is less than $15 if anyone else is interested.
