splicing headlight and foglight

[v6indodarknight]

to electric geniuses here...

if i want to splice the headlight ad foglight so anytime i turn on headligh the fog turns on, how do i do that???

is there a wire made for it??? were u just plug and play or do i need to make one my self???

or can i just cut and tape together? but won't that be fire hazzard???

plz help....

 

[RedRyder]

Just leave your fog switch in its 'on' position, and then anytime you flip on your headlights the fogs will be on also.

 

[v6indodarknight]

Just leave your fog switch in its 'on' position, and then anytime you flip on your headlights the fogs will be on also.

but the thing is,

i don't wanna do any wiring from outside to inside, and i don't want a switch,

i just want them join together, can i do that???

installing a switch by myself is a pain... i don't like how i have to do the wiring and stuff...

 

[001Stunna]

Cmonnn theres not that much wiring to do for the fogs...but if you really don't like work that much then you could possibly tap into the headlights(lowbeams) and use a relay. Hence the fogs will get their own power from the battery and only receive a signal from the lowbeams(headlights)

 

[v6indodarknight]

what i mean is to get the power and signal from the lowbeam... u know how the bulb have that little tap to plug into the wire that goes into the car?

is there like a splitter for it? so i can just plug and play?

do u understand me or not?

 

[001Stunna]

what i mean is to get the power and signal from the lowbeam... u know how the bulb have that little tap to plug into the wire that goes into the car?

is there like a splitter for it? so i can just plug and play?

do u understand me or not?

Well from what i understand you just want to split the power/signal that goes to the lowbeams and send it to the fogs as well. Which yes would make things very easy i guess...

Now im no electrician but only issue i see is possibly putting a strain on the oem headlight wire, hence why i suggested getting the power from the battery and just picking up the on/off signal from the oem headlight wire.


As for a splitter to do what you're mentioning, ive never seen one.

 

[v6indodarknight]

oh ok... thxz...

btw, can u show me how to get power from battery and get signal from oem headlight???

 

[001Stunna]

I would think this would probably work and you'd be using the harness that came with the fogs.

However, do not attempt it yet unitl someone actually confirms the above makes sense when it comes to electricals wise. I dont want you burning or blowing anything.

 

[v6indodarknight]

kk... thxz...

anyone else care to comment???

 

[nyckidd]

or check the DIY for running the fogs to the parking light and jus do it to the low beam instead