Td94u start up help

[rooky]

cg3low4life cg3low4life
Junior Member

Join Date: Nov 2015
Posts: 18
Rep Power: 0
cg3low4life is an unknown quantity at this point

Re: F20b td94u distributor - "need help with wiring"

Originally Posted by RedRyder View Post
"Merged again. Please stop making new threads on this topic, you only need update this one.

cg3low4life Re: Redryder shut the **** up"
Sent from my Z970 using Tapatalk

Dude I just found all the scattered threads you posted, but damn! you need to have patience because members on the forum have to work. Plus you disrespected Red Ryder which is a NO NO for me. I will be asshole to not help you.

My motto is "senior members are a vital piece of the forum"

I could understand if you know RED Ryder in person but you don't.

.

Every member please Boycott all the threads started by cg3low4life I don't care if he apologizes because he just joined in November looking for express help with vague threads scatter all over the place. And to top it off he has no respect or patience.

Update: below

Guys can we just help the dude out please, hes really sorry and desperate, Administrators, Supporters, Senior members can we just help him out because if there was better forum out there he would have joined it already so he knows our forum is the best. Space Monkey, RED, XCI, James99 and other members that did the swap before can we all just forgive and move on and help the dude out. He will provide me with the info and I will restart a new thread for him making sure everything is organized and easy to read. I am asking permission to do so because I cant merge with his old threads because they are scatter all over the place.

 

[cg3low4life]

Its the f20b bro obd2 swap in a 98 accord lx 5 speed stock f23a1 tranny stage 3 clutch the distributor is 8 pin 4 go to the crank shaft and the other go to the wiring next to the distribitor td94u

Sent from my Z970 using Tapatalk

 

[cg3low4life]

Rooky I'm really sorry about my language idont know how to use this app so that's why u see my messages every were iknow I acted like an asshole with redrider and I'm really sorry about that I should be talking to people like that but you dint had to that that's why no one answers I acted the way I did because I have like 5 months with the f20b in the car and it haven't even started everyone makes wrong choises and I know I did wrong but iknow I can't fix that I'm really sorry I think I'm going to erace this app I thought icould be part of a accord family but I guess not I'm really sorry

Sent from my Z970 using Tapatalk

 

[rooky]

Its the f20b bro obd2 swap in a 98 accord lx 5 speed stock f23a1 tranny stage 3 clutch the distributor is 8 pin 4 go to the crank shaft and the other go to the wiring next to the distributor td94u

Sent from my Z970 using Tapatalk

You didn't specify the f20b engine is JDM or USDM plus if its a obd2a or obd2b because the pin-out will change based on these left out info. Did your 98 LX came with a ULEV engine when you just got it? A piece of advice is ECU wiring differs if the engine is JDM or USDM. And you didn't tell us where you are located to know if emission laws will be a problem for you. As for the after market distributor you showed me on eBay I would have to figure what each color do because its not a OEM part so the wiring color and pin-out for the project you're trying to do wont be easy to find info on. I bet if you ask the seller for help on the wire colors they cant help you or they will give you an wrong answer because they just want to get rid of the part. You mention you been at this for five months with the engine but you just joined our forum in November, Patience my friend, patience.

I am not expecting any member to suck up to anyone or kiss anyone *** but these guys on here had helped me many times with my car that would cost me thousands of dollars if I was to take it to a auto repair shop. If you just joined the forum and you wasn't sure of positing a new thread all you had to do was ask. I am not praising these senior members on here but they know their **** plus most of them are ASE certified and repair cars for a living. You told me to look on your main page to know what is you're trying to do but there was no clue. My advice to you is to write in detail what is it you need help with and I will ask the guys and provide you an answer but you have to wait a while, like I said people have stuff to do.
The type of engine/Block/Head/Name on tranny because I'm guessing you wont need a stage three clutch but I cant say that yet cause I don't know what the hell you're trying to do make x amount of power.
The car the swap is going in
What kind of swap
Other engine that you will use
What is it you need help with because I saw one member post you a wiring diagram before.
Pleas list all your detail
Post picture of the engine and the whole swap

Again the more info I have the more I can help you.

 

[Jordan_H]

The F20b is jdm.

CG3low4life, I would suggest contacting Ryan from RyWire. He will ask for a pic of your stock wiring harness and a pic of the distributor and he will provide you with a conversion for probably les than $50. Many people can vouch for his work.

 

[rooky]

Thanks bro for jumping in because I am trying to do damage control for him to get him all the help he needs. CG3low4life go here http://www.kstuned.com/collections/kstuned-products/h-and-f-series I think maybe you might need a balance shaft eliminator. And here is the RYWIRE web: http://www.rywire.com/

 

[Jordan_H]

What Ecu are you planning to use?

 

[cg3low4life]

I still don't know what ecu to use

Sent from my Z970 using Tapatalk

 

[Jordan_H]

I still don't know what ecu to use

Sent from my Z970 using Tapatalk

If you use a p28 you won't have to wire in the knock sensor.

 

[cg3low4life]

Ohh OK bro so it's just plug n play or do I have to do something else?

Sent from my Z970 using Tapatalk