turbo turbo trubo

[sikjdm]

we don't play nice

 

[S13 @ FullBoost]

dude if you want help you need to tell what the **** is wrong with your car. Is it stuttering at idle?? Like whats going on I want to help you but you have to help me help you.

 

[boneyS]

lol srry for takein so long wit the post ........with the stock cpu the car doesnt take boost but i am sure its cause am not runnin a check valve but my prob is amm tryin to run a p28 ecu so after i put in injectors with the p28 the car doesnt idle to good an it wont go over 4.5 rpm an it has no sort of a pull at all

 

[nyknick1015]

did you do a full obd2 to obd1 conversion??... sounds like where vtec kicks in, its stopping it which is stopping the motor from the turbo spooling sucessfully

 

[boneyS]

no i didnt do the full conversion i need help on doing this where am from there isnt any turbo hondas am the only one

 

[ccordex00]

go obd1!

 

[98ExAccordwv]

no i didnt do the full conversion i need help on doing this where am from there isnt any turbo hondas am the only one

You can start with a conversion harness. Available from several places.
you'll need the obd2 to obd1 harness.
http://rywire.com/store/-c-35.html?osCsid=30a223aad5337fc27e1c9534e1b2be4f
http://www.boomslang.us/obd2to1.htm
those are just a few examples.

 

[boneyS]

i have the harness already i also has:
dsm 450 injectors/ with clips
afc neo
p28 chipped by phearable
walbro 255 fuel pump
not sure what else is needed

 

[Drift]

If you have a chipped p28, you've gone obdI.

You should get a fuel pump too.

 

[boneyS]

i do have a fuel pump