Would getting these load resistors work?
http://www.superbrightleds.com/tail-brake-turn.html (bottom of page)
Where would I put the resistors?
Turn Signal Out - Parking Lights Work
- Thread starter GoldnKnight22
- Start date
http://www.superbrightleds.com/tail-brake-turn.html (bottom of page)
Where would I put the resistors?
Thanks. Do I need to take the housings out to change the parking bulbs?
GoldnKnight22
TWM:TLMF
Nismode, lel me know if you have any more questions. I think I got 4-ohm resistors, I'd have to double check. But the 6-ohms will work too, I guess? 
I have my resistors dangling behind the headlight, tied off to a hole in the metal with some metal wire.
The resisitors do get hot, don't have it against plastic or anything else that could melt or get damaged.
I have my resistors dangling behind the headlight, tied off to a hole in the metal with some metal wire.
The resisitors do get hot, don't have it against plastic or anything else that could melt or get damaged.
tnguyen600
Well-Known Member
sorry for bumping an old thread, but I got a problem thats similar to this. I know it's a dual filament bulb but heres my issue. When my lights are off and I use my turn signals, my passenger side does the hyper blink. However, when I turn on my lights and use the turn signals, its super slow like ( blink.............blink..............blink)
Could the hyper and slow blinking be due to the bad filament or could this be a wiring issue.
Could the hyper and slow blinking be due to the bad filament or could this be a wiring issue.
DaSmittyman
Well-Known Member
do you have resistors? I bought the new clicker box thing(load equalizer) and it works great. So much better than resisters
Bada$$VTec
Well-Known Member
yea like andy said try a new bulb but if that doesnt fix ur problem get a new socket for the bulb cuz mine problem was kinda similar to urs n when i changed it it worked fine.
Last edited:
Deviousjet
Well-Known Member
Sorry to rebump an old thread but I'm have this issue and didn't want to create a new thread.
I'm having the oppposite problem of the OP. The drivers side corner lights flashes when I use the turning signal but the running light in that corner light doesn't go on at all. I know the bulbs aren't burned out so what could it be?
I'm having the oppposite problem of the OP. The drivers side corner lights flashes when I use the turning signal but the running light in that corner light doesn't go on at all. I know the bulbs aren't burned out so what could it be?
