Why won't these fuel pressure regulators fit a V6?
- Thread starter xci.ed6
- Start date
Still working fine.
So I got bored, and I took a vice and an O2 sensor socket...
I squished the crap out of it! (edit: ~10mm) I want to see if it will work, so testing tomorrow!
(edit: my stock one was squished, the new one that works will not be harmed)
So I got bored, and I took a vice and an O2 sensor socket...
I squished the crap out of it! (edit: ~10mm) I want to see if it will work, so testing tomorrow!
(edit: my stock one was squished, the new one that works will not be harmed)
Last edited:
Whoops! So I installed it, I was turning ~75psi! But I couldn't snap a pic because it was pissing fuel out the vacuum side, so it quickly dropped when the key was off!
So I swapped it back, and tossed the old one.
Note: if you try this, it may work, but squish them (to start with) 1 or 2 millimeters!
So I swapped it back, and tossed the old one.
Note: if you try this, it may work, but squish them (to start with) 1 or 2 millimeters!
Last edited:
