will this one go on the i4?

[simplesedan99]

this is a kit that i was lookin at...it says its for another engine but the engine and engine bay looks like a 6thgen so i was wonderin if n e one else could tell other wise.

http://www.edelbrock.com/sportcompact_new/mc/turbo/img/1500_instal_lg.jpg

and heres the link to the actual site

http://www.edelbrock.com/sportcompact_new/mc/turbo/turbo_perf.shtml

thanks and if this is pointless for me to even post up then just close it

 

[waccord99]

yea.....its on a 4 cyl d16 in the pic..........it will fit ya accord.....

 

[WhiteAccord]

Im just going to go ahead and slap you in the nuts...

3 things i just glanced at...

Exhaust mani = 0-0-0-0 ours is 0-00-0
Suspension = has only two stems ours I think have 5...
Motor has no VTAKKKKK

You live in Georgia, If you want a kit I have a friend who is selling his for 2500 (Custom kit) PM if your interested.

yea.....its on a 4 cyl d16 in the pic..........it will fit ya accord.....

I hope your kidding too, Or I shall flick your nuts...

 

[simplesedan99]

thanks i was expecting that lol its all cool though

 

[DarkSideAccord]

d series and f series manifold are different.. u could get that kit and change out the manifold and piping, but it'll cost ya more in the end

 

[pyaarawala]

That's an interesting intake. It goes all the way down then comes back up?

 

[waccord99]

Im just going to go ahead and slap you in the nuts...

3 things i just glanced at...

Exhaust mani = 0-0-0-0 ours is 0-00-0
Suspension = has only two stems ours I think have 5...
Motor has no VTAKKKKK

You live in Georgia, If you want a kit I have a friend who is selling his for 2500 (Custom kit) PM if your interested.



I hope your kidding too, Or I shall flick your nuts...

obviously the exhaust manifold doesnt fit.........why would it matter if it has vtec of not..having it professionally tuned would handle that...........so flick your own nuts.....homo.

 

[BlkCurrantKord]

obviously the exhaust manifold doesnt fit.........why would it matter if it has vtec of not..having it professionally tuned would handle that...........so flick your own nuts.....homo.

Look at the first pic before talking smack and you might understand what he was getting at.

 

[AlbanianCord99]

The engine shown in the first picture is a d16y8. It is vtec. If you look closely you can see the cilanoid on the left top side of the head. If you change the turbo manifold and get one for the accord you should be allright. You might need some piping also.

 

[simplesedan99]

problem solved....found another route to go.....no need to tear eachother to pieces about this...lets just close it and just be friends....and no nut flickin either...mine stil hurt