accord27
Well-Known Member
So I was thinking.... I keep seeing posts about stock shocks with lowering springs being a bad idea because the shock will blow out. I don't know if anyone ever thought of this before,but I was wondering if anyone ever tried using a tap to make more thread on the shock rod and shaving the rod down where the washer for the top hat lands a couple inches down. This causes the rod from traveling all the way to the bottom(which causes the shock to blow). So technically the rod will not blow due to bottoming out.
Sorry I can't elaborate much...I'm on my g1 fone typing this. Ill try to provide more info in the morning. =)
Sorry I can't elaborate much...I'm on my g1 fone typing this. Ill try to provide more info in the morning. =)