Search results

  1. dorkiedoode

    DIY: How To do a FULL rebuild on power steering pump

    Nice writeup! Here is a really good video for a visual. I recently done this procedure with a brass hammer on a vice to remove the shaft and bearings. Works great! https://www.youtube.com/watch?v=nwmIHFwNwgE
  2. dorkiedoode

    Pressure Switch Replacement

    Update: Well I finally found the 2nd clutch switch and replaced it with a new one. Just in case anyone is looking to do the same, I will attach a picture of its location. If you lucky enough to unplug it without removing the rad hose, you can just slip in a 22mm socket to remove it. However...
  3. dorkiedoode

    Pressure Switch Replacement

    Thanks Wheelman for the pictures. I attempt to search for it today but for the life of me I cannot find it!! I manage to only replace the 3rd gear one..:Boo:
  4. dorkiedoode

    Pressure Switch Replacement

    Have you done it before? Or happen to know where the switch is? Its definitely not in the same place as the 7th gen. I was able to locate the 3rd gear but not the 4th.
  5. dorkiedoode

    Pressure Switch Replacement

    Has anyone replaced the pressure sensor for our generation? I've been reading about it on V6P but I'm not sure if its applicable for our generation. I was able to locate the 3rd gear under the battery but not sure where the 4th one is...
  6. dorkiedoode

    Lots of Engine Oil Leaking

    No pan gasket. RTV or whatever Honda uses. Read somewhere RTV black *correction GRAY RTV* was similar to what honda uses. I believe you have to remove the J pipe in order to remove the oil pan for the v6.
  7. dorkiedoode

    FS: Sold: OEM Stanley Headlights

    Re: OEM Stanley Headlights Lol maybe you got some front end damage.
  8. dorkiedoode

    FS: 11/29/12 Parts for sale!

    Let me know about the pictures for the oem clock I requested. Thanks
  9. dorkiedoode

    having problems with my A/C, no cold air

    bring it to the pros and let them check to see if you have any leaks or problems etc, you cant diy A/C without the proper gear like a dual gauge manifold.
  10. dorkiedoode

    Viper 5901 Alarm DIY!

    definitely get a bosch if you can. Or a rebranded bosch.
  11. dorkiedoode

    Viper 5901 Alarm DIY!

    I used a 12v power supply when I was testing mine. Any 12V should be fine. Chances of frying something is slim. Your more likely to blow a fuse then anything. Your only applying it for like a second before your trunk pops. Anything metal can be ground.
  12. dorkiedoode

    Viper 5901 Alarm DIY!

    not sure if our car has the same wiring or not but what your looking for is a wire that when 12v is applied, it will pop the trunk. quick way to find out? apply 12v to the wire and see if it pops right way? use a multimeter with the key fob but since you do not have this then Alternative way...
  13. dorkiedoode

    AT&T Factory Unlock for iPhones

    I actually do most iPhones from all countries but they are $$ so I don't really advertise them. What were you looking for? Pm me
  14. dorkiedoode

    AT&T Factory Unlock for iPhones

    Unlocking4u is probably you..
  15. dorkiedoode

    AT&T Factory Unlock for iPhones

    Anyone need to unlock their iPhone? I can unlock iPhone 3, 3gs, 4, 4s and 5. pm me. www.premierunlocks.com use coupon "pr0mo" for 5 off att
  16. dorkiedoode

    DIY: Installing Reverse Camera for Sedan

    wow great diy. alternative route is getting yourself one of these baby. they replace one of the license plate light. http://www.ebay.com/itm/170-COLOR-CCD-REAR-VIEW-REVERSE-BACK-UP-CAMERA-for-HONDA-ACCORD-Ruckfahrkamera-/310360853021?pt=LH_DefaultDomain_100&hash=item4842f2ca1d&vxp=mtr
  17. dorkiedoode

    looking to buy new cap rotor plugs and wires any suggestions?

    OEM. they're not that expensive.
  18. dorkiedoode

    Whats your MPG on a full tank?

    Yes because soon you'll be getting 0 mpg lol :p
  19. dorkiedoode

    99 Accord Alarm problem Driver side only

    Can you explain the problem clearly? I read it twice and I still do not understand what you are trying to convey.
  20. dorkiedoode

    HID's Questions and Concerns

    umm the higher the Kelvin or K rating on a bulb, the lower the light output in lumens So 4300k (factory) - 5000k should be max. 6k are for ppl who want that bluish tints. oh and HID are illegal if they are used in headlights that are not design for them.
  21. dorkiedoode

    Headlights Light Change

    This would definitely be an alternative to HID if that is what your looking for.
  22. dorkiedoode

    I need a DIY on replacing the AC Compressor

    explain..
  23. dorkiedoode

    Car starts but with issues

    Its your main relay/fuel pump. I bet you didn't hear the fuel pump prime when you turn on the car. At least I didn't in that video. I had the same problem last week and it usually goes away by itself. The next time it does that turn the key to ignition and listen for the fuel pump, if you don't...
  24. dorkiedoode

    Issues with HID harnesses??

    And the relay is the square black box where all the wires are connected it to. FYI if you don't know already.
  25. dorkiedoode

    Issues with HID harnesses??

    There's no reason to worry about running without the relay. Actually I lied there are several theoretical reasons why you need it but from my real experience I have not ran into any trouble running w/o one. And I know many others as well. You said the relay failed, why did you replace the...

Latest posts

Random media

Wht00Accord3
CL1 Side Skirts
10961 472923342856222 713268275980004394 n
CIMG01772
Cuts made wih snips after measuring and fitting
Back
Top