Camber kit buying help

[001Stunna]

i thought camber can be zeroed out in the front for our cars ?

Camber isn't adjustable in the front or back in our cars. Can only be done so with a aftermarket camber kit.

 

[lltradell]

I was going to order ingalls but then i read that you need to buy 2 sets.
http://www.ingallseng.com/38720-smartarm-adjustable-link-camber-toe-rubber-bushings.html
Do you really need to buy 1 set or 2 to just adjust camber for the rear.

 

[GoldnKnight22]

You don't need a camber kit. You're specs are WELL beyond fine. Save your money.


/thread

 

[lltradell]

You don't need a camber kit. You're specs are WELL beyond fine. Save your money.


/thread

-1.6 and -2.3 for my rears arent that bad but visually i can see it big time and i will be doing alot of commuting so id rather zero it out. So I still need help with the ingalls rear install.

 

[GoldnKnight22]

No you don't. You just think you do.


Less than 2.5 degrees of camber.... I wouldn't be worrying about that with good Toe specs.

 

[CrosCntryAccord]

No you don't. You just think you do.


Less than 2.5 degrees of camber.... I wouldn't be worrying about that with good Toe specs.

once again


THIS.

 

[lltradell]

No you don't. You just think you do.


Less than 2.5 degrees of camber.... I wouldn't be worrying about that with good Toe specs.

I seriously could see only half my tires touching the floor. Well its too late, my rear camber kit just came in. I could return it though but it was only $130 for ingalls. Its more of a piece of mind for me.

 

[OldNo7_CG2]

You should get an alignment and get your toe zeroed out to specs(assuming you've let the springs settle for 2-3 weeks of driving).
For our cars specs are
Camber angle: Front: 0°00' ±1° Rear: -0°30' ±1°
Front toe: 0 ±2 mm (0 ±1/16 inch)
Rear toe-in: 2 ±2 mm (1/16 ±1/16 inch)

Chances are a camber kit up front will hit so you might be better off just fixing the back unless you can deal with the UCA hitting. For the back you pretty much have 2 choices.
Upper arm style SPC, Wicked Tuning
Lower arm style Ingalls

take a look at the Ingalls Low Profile Upper Ajustable Control Arms, i plan on getting them soon they wont hit they are for lowered cars...

 

[lltradell]

front specs arent that bad so ima live with it. did the rears only and im satisfied.

 

[OldNo7_CG2]

front specs arent that bad so ima live with it. did the rears only and im satisfied.

yeah im only going to order them with my ksports because i wanna replace the upper ball joint and upper arm bushings and its cheaper to get the complete camber control arms... how are the rears ? what suspension did you go with? looking to buy ksports