Endlink Question(s)

[Mikey]

When it comes to the TL MT RSB, can we use the TL endlinks or is Moog pretty much our only/best option?

The bar itself and the bushings/holders can be had for less than $50 but I feel like there's gotta be other options for the endlinks other than just Moog. I would think we could use the OEM TL ones. Or is it just late and I'm crazy? Lol.

 

[twofast4u]

personally. I used my oem accord ones when I installed my TL RSB. I dont really know if the TL endlinks will really make any sort of difference.

 

[Mikey]

I'm not necessarily looking for a difference, just something in case mine are toast. Moogs are $50 compared to about $30 for the TL ones.

Was just curious if anyone has used the TL ones or knows if they'll even work.

 

[twofast4u]

hmmm just compared aftermarket part numbers between the TL and accord ones. They both seem to be the same number. So I guess you could use the TL ones on the accord.

 

[RedRyder]

Moogs are suppose to be more beefy and durable, but every time I’ve gone to remove one after they’ve been on the car for a year or more, the inside or outside nut (or both) strips. I used the correct tools, lubes, seize prevention, patience, etc. If I ever have to remove endlinks again, I’ll go with something else.

 

[agginline86]

Moogs are suppose to be more beefy and durable, but every time I’ve gone to remove one after they’ve been on the car for a year or more, the inside or outside nut (or both) strips. I used the correct tools, lubes, seize prevention, patience, etc. If I ever have to remove endlinks again, I’ll go with something else.

wait do you have OEM or Moog endlinks?

 

[RedRyder]

Moog. Gone through a few of them.

 

[Mikey]

Interesting input Christopher. Thanks. I was just looking at the diagram of the TL bar and the endlinks not only appeared very similar but I thought if I'm gonna get a TL bar, why not get TL endlinks while I'm at it.

 

[Mikey]

hmmm just compared aftermarket part numbers between the TL and accord ones. They both seem to be the same number. So I guess you could use the TL ones on the accord.

I found both to begin with 52320 and 52325. If that's the only important number then, yes, they should work.

 

[RedRyder]

Interesting input Christopher. Thanks. I was just looking at the diagram of the TL bar and the endlinks not only appeared very similar but I thought if I'm gonna get a TL bar, why not get TL endlinks while I'm at it.

I keep thinking of selling my TL 20mm bar, but I sold my 17" and you know how I like to be able to revert back to OEM parts.