Los1652
Member
ok well I have the ulev motor.. and by using many of the write ups I found on here by badger and a few others I was able to get my car running with the manual computer, and my reverse lights wired... the problem I am having is with the speedo and vtec.. I depinned D10 to C 23 like posted on here, I have the VSS wiring harness grounded, and spliced with the distributor, also like posted on here, the main problem I am having is that in badgers write up there is said to have a blue and white wire found behind the pass fuse box which I cannot find to save my life, I also pulled my cluster out and cannot locate a blue and white wire plugged into the speedo.. I have been searching and searching and I can't figure it out. I looked at the haynes manual and sure enough it does show a blue and white wire that is said to be vss.. any ideas... maybe a picture of the way its supposed to go or a drawing in crayon or somethin?!?!