If you dont wanna deal with drillin all em holes into ur rear bump just do this
http://www.6thgenaccord.com/forums/showthread.php?t=29911&highlight=oem+lip+kit
http://www.6thgenaccord.com/forums/showthread.php?t=29911&highlight=oem+lip+kit
That's not a Mugen lip, but with those you generally are just going to have to make your own holes. There are no templates for those types of lips, you just need to add tape and screw it in.
The template I'm referring to is for the rear lip only. The BaysonR lip will fit the same way as the one you have now... Just screw the sides in and tape the middle. There is no need to add extra screws.I know, it's a ripoff of Mugen with way larger vents. Not my favorite but it's not gaudy. If I used an OEM template would that be good in case I wanted to switch later to something else, say that new BaysonR one? Or for each that do use templates, are they all different?
I think who ever made that lip was trying to combine to mugen lips the one people usually see with the two vents, and also the lip for the 97 civics like this.http://i51.photobucket.com/albums/f361/ongking/IMG_5923_edited-1.jpgThe template I'm referring to is for the rear lip only. The BaysonR lip will fit the same way as the one you have now... Just screw the sides in and tape the middle. There is no need to add extra screws.
Also, just to reiterate. That lip has no connection to the Mugen lip. It's a cheap ripoff of the JP Auto/Vizage lip for the sedans, modified to fit the coupe.
http://cgi.ebay.com/ebaymotors/1998...rQ5fTruckQ5fPartsQ5fAccessories#ht_4951wt_939