Recent content by kamozee

  1. kamozee

    HIDs in stock fog lights

    Wondering if anyone has successfully retrofitted HIDs into the stock 6th gen fog light housing. When I inquired with the shop previously they told me that they would need to cut the rear of the housing to make the H3 HID bulb fit. Has anyone done it successfully? Is there a shorter HID H3...
  2. kamozee

    Replacing suspension mounting parts

    Thanks for checking Chris. As for 12 in both pics, those dust covers don't fit the koni yellows. After a quick search I found some Civic guys were getting universal dust covers from parts shops. Here is a pic of an example Credit for the pic comes from this thread on OZ Honda
  3. kamozee

    Replacing coilovers - FF2 or koni yellow?

    So that's enough convincing for me...I'll try to get these seized ground control collars off somehow and if not, I'll get new ones
  4. kamozee

    Replacing coilovers - FF2 or koni yellow?

    There's another shop I checked with that is very reliable and the consensus is the same... Please check out this thread Chris, which I've made to see which suspension parts are needed...
  5. kamozee

    Replacing suspension mounting parts

    I emailed Koni and this is their reply The KONI sport yellow dampers only include the washers/sleeve/installation nut. Front KONI’s include (10,8,13,5,15), rear KONI’s include (13,3,4,1,18) So that leaves in front (6, 7, 9, 11, 12) and the rear (2, 10, 11, 12, 14, 15); so are any of these...
  6. kamozee

    Replacing coilovers - FF2 or koni yellow?

    I'm stuck in a decision between getting Form & Function 2 or replacing my koni yellow shocks. Koni will not replace my shocks under warranty since my ground control sleeves are seized onto them. I also have to get new suspension components as my bump stops and shock mounts need replacing... I...
  7. kamozee

    Brake light fuse blown...

    ...and it keeps doing it every time I install a new fuse I first noticed that my cruise control was not engaging yesterday. I got home that evening and could not see my brake lighting up through my rear view. I checked under the hood and noticed the brake light fuse was blown. I replaced...
  8. kamozee

    Replacing suspension mounting parts

    I'm planning to get brand new mounting parts to install my ground control coilover sleeves and koni yellow shocks. Dealer is quoting close to $500CAD and even Majestic Honda is coming up to $400CAD (after conversion) That price is everything except spring and shock from these pics I...
  9. kamozee

    Ground control sleeves seized onto koni yellows

    Yes I got my GCs at the same time as you did Chris. My yellows are, however, about 8 years old!! Sent from my iPhone using Tapatalk
  10. kamozee

    Ground control sleeves seized onto koni yellows

    It's the red part that sits onto the shock. Don't think it's attached by anything Sent from my iPhone using Tapatalk
  11. kamozee

    Ground control sleeves seized onto koni yellows

    So I wanted to send in my koni yellow shocks for warranty but can't get the sleeves to come off!! I tried a couple mechanics and they told me the sleeves would be damaged in the process. Any suggestions? Pics attached
  12. kamozee

    Wheel Fitment Thread

    I found a staggered set of TE37s 18x8.5+22 front and 18x9.5+33 rear. They are currently wrapped in 245/35 and I would replace them with 225/40/18 tires. Any safety issues with this setup? I drive 100km (~65 miles) five times a month each direction on the highway to my contract job. Someone...
  13. kamozee

    Wheel Fitment Thread

    Looks like 18x9 +35 has 9mm more clearance than 18x9.5 +38 so it should be good!! Thanks for the offer Chris. Since they are different wheels it may not give any information
  14. kamozee

    Wheel Fitment Thread

    Will 18x9 +35 Enkei RPF1 clear the RL caliper? Fenders are rolled and pulled on a coupe. Lowered on Ground Controls & Koni Yellows
  15. kamozee

    SRS light culprit: passenger seat weight sensor?

    Thanks for the suggestions guys!
Back
Top