J32A2 + 6MT swap in my '01 F23/H23 5MT chassis

Bense

Well-Known Member
Joined
Jun 28, 2014
Posts
116
Reaction score
5
Location
Carolinas
Looks like the front sub frame is similar enough to the automatic version. The one from the manual trans is a bit rusted in the junkyard. There's only 1 hole that holds some mount for the transmission. Easier for me to just grind off the paint and weld a small plate onto the subframe (if I even need to do it)


It's a good thing I took all those years in welding training, so that I could work a few weeks of ****ty welding jobs before I decided that it was time to find a new career. But hey, -- at least i can weld whatever I want lol
 

Bense

Well-Known Member
Joined
Jun 28, 2014
Posts
116
Reaction score
5
Location
Carolinas
Got most, if not all of the parts to do the swap. But I'm almost done with my research on how to make the gearing of the transmission better.

And no, I'm not just talking about the final drive.
 

Bense

Well-Known Member
Joined
Jun 28, 2014
Posts
116
Reaction score
5
Location
Carolinas
Aww yeahhhh
jZ9VPC3CXVqWtHADCmK9IwVX0HFDwpCZct1fl1vf9P2shTIDH9ic2gGoN3i48y0BKjGsfaCXGhiZA-s=w1920-h1200-rw-no


CL-S front strut bar and rear sway bar.
gPhoIMMMOxj4AGTxS08S61pWrGQQ3Sv1aLxlzzFNgMtJ8WJg7VZ3u4kQ6wc3laJ32KuLZ0tFienMZUY=w1920-h1200-rw-no


A bit dirty
QrNr9LmGVCkiQPYWGwu7xK6N79SbwhidZkVgw9H_TNExJXoVgPfLzrXtLP-DDNiguh2Jxl6kR0RFgWs=w1920-h1200-rw-no


Looks like it came with some headers
NrXRfz5u9fJtvSVvHV5KBsxmLlWEBMTKFYFpmGG7tiNfSYru-TBV7WUy3wTclaPhYmLkiMADh75BEKQ=w1920-h1200-rw-no


And some pulleys
vOn5y6Mejd4sg2ugnOh7JvrbxV5ceYcLar55OMrHndxvyRKzWvinMaekeyGF4Tv7vdkUOABhyc1s-98=w1920-h1200-rw-no


Parts...
bS1YqFdooaiinc5drIzNjoRbZmAYMblvElyyIsPAH5zBJcrU0_ZF68gSSjLa0aILhl1VnSZSD_6IqfU=w1920-h1200-rw-no


Some transmissions....
QjFuJ3ikdg3RO9H_kOCu0df4iz67-uPc4ybEKJPz_-EiqYkDDhlE8wt8ahHSKzbu5E0magwGqQvgrNQ=w1920-h1200-rw-no
 

Bense

Well-Known Member
Joined
Jun 28, 2014
Posts
116
Reaction score
5
Location
Carolinas
If you don't want the front rotors, I might be interested in buying them if you go back for other parts.

I know that this is ~4 years old. However, this leaves me to believe that you've also got the same Rotora brake kit. If so, this thread contains valuable information on how to replace the consumable parts (pads + rotors) using readily available, off the shelf parts;
https://honda-tech.com/forums/suspension-brakes-54/rotora-big-brake-kit-replacement-pads-3344882/
 

RedRyder

Save the manuals
Joined
Sep 5, 2008
Posts
19,516
Reaction score
116
Location
Fawking, OH
I know that this is ~4 years old. However, this leaves me to believe that you've also got the same Rotora brake kit. If so, this thread contains valuable information on how to replace the consumable parts (pads + rotors) using readily available, off the shelf parts;
https://honda-tech.com/forums/suspension-brakes-54/rotora-big-brake-kit-replacement-pads-3344882/

Thanks but I have the older Rotora BBK w/1pc rotors, before they screwed everyone and went to 2pc rotor kits, offering no replacement for the 1pc. I scoured the internet for a while but found no viable solution that was reasonable or cost effective.

For awhile I thought about spacing the Rotora caliper to accept 28mm but never got deep into that.
 
Last edited:

Bense

Well-Known Member
Joined
Jun 28, 2014
Posts
116
Reaction score
5
Location
Carolinas
Thanks but I have the older Rotora BBK w/1pc rotors, before they screwed everyone and went to 2pc rotor kits, offering no replacement for the 1pc. I scoured the internet for a while but found no viable solution that was reasonable or cost effective.

For awhile I thought about spacing the Rotora caliper to accept 28mm but never got deep into that.

Check my latest reply. Post #4.

I use 2017-2020 Mini Countryman rotor, which is 330x24mm and fits great. You will have to make a one time purchase of $25 for 4 hubcentric rings and about $8 in hardware.

I don't even have to modify the rotor. It just fits on with the adapter rings.
 

RedRyder

Save the manuals
Joined
Sep 5, 2008
Posts
19,516
Reaction score
116
Location
Fawking, OH
Hmm alright, I will re-read. Thanks man, I miss those calipers, car looked so much better.
 

619rcr

Well-Known Member
Joined
Jan 3, 2013
Posts
319
Reaction score
31
Location
AZ
Bense, did you ever do this swap?

I kind of hoped to do this, and got stopped at the passenger side mount. There is a different wheel housing on the 6 cyl, that is discontinued from Honda/Acura. There are a bunch of spot welds, that discouraged me from removing the wheel housing. I've found the part in a junkyard in NorCal, but they wouldn't sell it without the whole radiator support, so I didn't get it.

Anyways, I still kind of want to do it, esp since I have an 01 Accord coupe and supercharged 03 CLS 6MT.
 
Back
Top