02 coupe fog lights

rave93

Active Member
Joined
Mar 7, 2011
Posts
36
Reaction score
0
Location
BC
kay im having the exact same problem (everything connected then funny noise from relay )
i also have the 4 cyl engine, so im assuming that single pin connector or the wire is located on the passenger side of the car. i tried connecting it to the one that was pictured above, but it was the wrong connector. is there anywhere else to find the right connector?
thanks
rave
 

jdm egizzle 6

Well-Known Member
Joined
Oct 30, 2009
Posts
149
Reaction score
0
Location
phx
I had the same problem but I have a 98 sedan. I connected everything! just connector b was missing(98lx) had the buzzing noise, lights didn't work so I just connected em to my h.i.d and grounded em
 

rave93

Active Member
Joined
Mar 7, 2011
Posts
36
Reaction score
0
Location
BC
ne input would be greatly appreciated! im gonna try calling the depo place and see what they reccomend me doing.
i was thinking of running it through the parking lights, but it would be a waste as i would like to be able to use the switch as well :(
 

rave93

Active Member
Joined
Mar 7, 2011
Posts
36
Reaction score
0
Location
BC
hey thanks for the reply! the link doesnt seem to work, keeps 404-ing
 

rave93

Active Member
Joined
Mar 7, 2011
Posts
36
Reaction score
0
Location
BC
anyone else? im gonna msg the seller through amazon and see if he has any suggestions as to where this single pin connector may be located (on the 4 dylinder)
thanks for the input!
 

kapesports

Well-Known Member
Joined
Aug 18, 2010
Posts
86
Reaction score
0
Location
SNJ
hey thanks for the reply! the link doesnt seem to work, keeps 404-ing

Link Fixed.. sorry about that.. By the way, thanks Jephu for this link... got it off him..
 
Last edited:

1NonlyAccord

Well-Known Member
Joined
Aug 5, 2008
Posts
2,389
Reaction score
22
Location
GA
thats alot of wires for 2 simple fog lights..why dont you just hardwire them and the switch..safe yourself the headace...just ground/power/ignition source. then use the civic DIY thread that uses the OEM accord switch to find out the pinout for the correct ground/power ect..take 4 wires or so instead of that nest of wires and connectors..easier IMO if you know anything about the 12v in cars
 

Latest posts

Back
Top