An introduction......

AllGOnoSHOW

Well-Known Member
Joined
Nov 24, 2008
Posts
8,204
Reaction score
25
Location
asdfasdfasdf
blah I don't need the motor. I just need the regulator, and really just the little bolt that holds the two parts of the regulator together. JB weld time!
 

SykVSyx

Well-Known Member
Joined
Jan 6, 2007
Posts
13,940
Reaction score
30
Location
Tee Dot Ohh
I wonder if it's my regulator as well. I can control my driver's side window, but can't control any of the other windows from the driver's side. :confused:
 

hondacuraplanet

6GA Vendor
Joined
Jun 11, 2010
Posts
71
Reaction score
1
Location
Buffalo, New York
Yours is most likely the switch. All of the power for all the window switches is run through the drivers master switch, because the master switch has the lockout function....
 

SykVSyx

Well-Known Member
Joined
Jan 6, 2007
Posts
13,940
Reaction score
30
Location
Tee Dot Ohh
Yours is most likely the switch. All of the power for all the window switches is run through the drivers master switch, because the master switch has the lockout function....

How much are we looking at for the master switch, please, Tim?
 

hondacuraplanet

6GA Vendor
Joined
Jun 11, 2010
Posts
71
Reaction score
1
Location
Buffalo, New York
Before replacing it, take the switch face off and go at the contacts with a can of DeOxIt or similar electronic contact cleaner. The switches used to go bad in the Legends all the time, and always because of crap on the contacts. I'd give an 80% chance that'll cure it :)
 

SykVSyx

Well-Known Member
Joined
Jan 6, 2007
Posts
13,940
Reaction score
30
Location
Tee Dot Ohh
Before replacing it, take the switch face off and go at the contacts with a can of DeOxIt or similar electronic contact cleaner. The switches used to go bad in the Legends all the time, and always because of crap on the contacts. I'd give an 80% chance that'll cure it :)

Always appreciate a cheaper option for a fix! Thanks, Tim! :thumbup:
 
Back
Top