Auto to manual conversion questions.

[BlkCurrantKord]

I'm 90% certain you can use those.

 

[BadgerType]

Thanks guys but what about the axle and half shaft?

halfshaft = yes

axle = I believe i made one fit, but not 100% positive

 

[lucky lak]

Did the swap a while back and having problems with the speedo not worki g... Followed the wire write up and it worked on a p28.. But with the 5speed paa from the donor car the speedo isnt worki g

 

[RalfFee]

halfshaft = yes

axle = I believe i made one fit, but not 100% positive

Thanks man, also I just wanted to say your write up is awesome

 

[RalfFee]

Thanks guys, I'm probably going to stick with the 5th gen half shaft and just get a 6th gen manual driver side axle just to be on the safe side. I'm not sure on the master and slave cylinder as well as the clutch line though.

 

[BadgerType]

master will work on certain ludes and accords. the slave should always match the tranny though. clutch lines are....... clutch lines