Auto to manual conversion questions.

BlkCurrantKord · Nov 27, 2014

I'm 90% certain you can use those.

BadgerType · Nov 29, 2014

RalfFee said:
Thanks guys but what about the axle and half shaft?

halfshaft = yes

axle = I believe i made one fit, but not 100% positive

lucky lak · Nov 30, 2014

Did the swap a while back and having problems with the speedo not worki g... Followed the wire write up and it worked on a p28.. But with the 5speed paa from the donor car the speedo isnt worki g

RalfFee · Nov 30, 2014

BadgerType said:
halfshaft = yes

axle = I believe i made one fit, but not 100% positive

Thanks man, also I just wanted to say your write up is awesome :roflbow:

RalfFee · Nov 30, 2014

Thanks guys, I'm probably going to stick with the 5th gen half shaft and just get a 6th gen manual driver side axle just to be on the safe side. I'm not sure on the master and slave cylinder as well as the clutch line though.