car too bouncy camber kit................ help

truWarier02

Well-Known Member
Joined
Oct 30, 2008
Posts
4,481
Reaction score
28
Location
Los Angeles
OP, how low are you (top of fender to ground)? Or do you have pics?

UCA will smack no matter what if you're low enough, probably 23.5" or lower.
 

Sketch o5

'Tis I
Joined
Sep 6, 2005
Posts
26,576
Reaction score
228
Location
░▒▓▒░▒▓▒░
the front camber kits decrease the clearance between itself and the strut tower. since the camber kit ball joints are taller than the oem ball joints, they could hit more often than the oem ones. granted ebay coilover sleeves are shit, but you said you started to hear the knocking after you put the front camber kit in. like i said, the knocking is because your upper control arm is hitting the strut tower, and the camber kit decreases the clearance you have there. the only solution is to raise your car a little bit...but raising cars is for pussies :lawl:

and your car is bouncy because of the ebay coilover sleeves.​
 

mr.6thgen

Member
Joined
Aug 5, 2011
Posts
12
Reaction score
0
Location
texas
the front camber kits decrease the clearance between itself and the strut tower. since the camber kit ball joints are taller than the oem ball joints, they could hit more often than the oem ones. granted ebay coilover sleeves are shit, but you said you started to hear the knocking after you put the front camber kit in. like i said, the knocking is because your upper control arm is hitting the strut tower, and the camber kit decreases the clearance you have there. the only solution is to raise your car a little bit...but raising cars is for pussies :lawl:

and your car is bouncy because of the ebay coilover sleeves.​

the bouncy part isnt really a problem right now. i am saving for some better coilvers. but the camber kit is hitting the engine bay. the inside... idk what its called. i raised my car but the camber kit still hits
 

DarkSideAccord

nadeshiko fobz ftw..
Joined
Sep 19, 2005
Posts
23,120
Reaction score
264
Location
CA
take those front camber kits asap... one guy i knew had the camber kit tear thru into the engine bay
 

99accord boi

Well-Known Member
Joined
Jul 14, 2010
Posts
1,068
Reaction score
7
Location
OC SoCal
take those front camber kits asap... one guy i knew had the camber kit tear thru into the engine bay

did he hit a dip goin 40 with a car full of fat people?
i met a guy who hit his controls arms so hard everything flew in the air his stereo shut off momentarily he had change in his cup holder and that flew everywhere and wen we looked in his bay he had a small dent on the upper wells
 
Back
Top