Nov 23, 2012 #1 L LM1092 Active Member Joined Nov 14, 2012 Posts 29 Reaction score 0 Location North Carolina How much Compression can a stock F23A1 handle?
Nov 23, 2012 #2 Narftastic Well-Known Member Joined Dec 23, 2010 Posts 3,673 Reaction score 15 Location Philadelphia, PA 76554489972
Nov 23, 2012 #3 Valet IS300 SX > Accord Joined Dec 27, 2011 Posts 4,701 Reaction score 15 Location Frederick, Maryland
Nov 23, 2012 #4 L LM1092 Active Member Joined Nov 14, 2012 Posts 29 Reaction score 0 Location North Carolina i<3jdm said: 76554489972 Click to expand... What is that?
Nov 23, 2012 #5 Valet IS300 SX > Accord Joined Dec 27, 2011 Posts 4,701 Reaction score 15 Location Frederick, Maryland If there was a clear answer..... What do you plan to do?
Nov 23, 2012 #6 B BlkCurrantKord Super Moderator Joined Sep 7, 2005 Posts 9,870 Reaction score 85 Location Ohio Are we talking.... Stock block - stock internals Stock block - forged internals Sleeved block - forged internals What size turbo, psi, etc....it all matters.
Are we talking.... Stock block - stock internals Stock block - forged internals Sleeved block - forged internals What size turbo, psi, etc....it all matters.
Nov 23, 2012 #7 L LM1092 Active Member Joined Nov 14, 2012 Posts 29 Reaction score 0 Location North Carolina Stock Block Custom K20A3 Pistons
Nov 24, 2012 #8 Valet IS300 SX > Accord Joined Dec 27, 2011 Posts 4,701 Reaction score 15 Location Frederick, Maryland Assuming stock crank, rods, and forged pistons with a bone stock head... I wouldn't personally go more than 12, maybe 12.5
Assuming stock crank, rods, and forged pistons with a bone stock head... I wouldn't personally go more than 12, maybe 12.5
Nov 24, 2012 #9 L LM1092 Active Member Joined Nov 14, 2012 Posts 29 Reaction score 0 Location North Carolina cleansleeper said: Assuming stock crank, rods, and forged pistons with a bone stock head... I wouldn't personally go more than 12, maybe 12.5 Click to expand... So if I was to get Custom K20A3 Pistons Rated at 11.5:1 those would work?
cleansleeper said: Assuming stock crank, rods, and forged pistons with a bone stock head... I wouldn't personally go more than 12, maybe 12.5 Click to expand... So if I was to get Custom K20A3 Pistons Rated at 11.5:1 those would work?
Nov 24, 2012 #10 Valet IS300 SX > Accord Joined Dec 27, 2011 Posts 4,701 Reaction score 15 Location Frederick, Maryland If you have a k20 then it'll be 11.5, but you don't. Use this: H/F Series Compression Calculator Enter in the info and it'll give you what the compression will be. Or at least a very very close estimate.
If you have a k20 then it'll be 11.5, but you don't. Use this: H/F Series Compression Calculator Enter in the info and it'll give you what the compression will be. Or at least a very very close estimate.