DIY 01-03 JDM Civic Fog Lights

dynasty

Well-Known Member
Joined
Jul 7, 2006
Posts
2,515
Reaction score
6
the fuse is bound to be blown again. reason why is the electrical current is not balanced. you probably put the trigger wire to the positive terminal of the battery instead of the power wire to the battery. i would try it again. but like i asked before, you didn't use the relay they gave you?
 

Russianred

Snail Spools You!
Joined
Jan 10, 2007
Posts
9,458
Reaction score
50
Location
Southern Maine [207]
Johnny, glad to see you are almost done!
Lights look good, fix that license plate - it's bent. Re-clearcoat your roof, and you're good!

Did you have a gap on the outer edge of the fog lights after install, as if they were not tight enough to the bumper?
 

johnnydinh701

Well-Known Member
Joined
Feb 5, 2007
Posts
934
Reaction score
0
Location
Valencia
the fuse is bound to be blown again. reason why is the electrical current is not balanced. you probably put the trigger wire to the positive terminal of the battery instead of the power wire to the battery. i would try it again. but like i asked before, you didn't use the relay they gave you?

yea i tried switching them and for some reason it didnt work and so thats why i wired it like i did in the pictures and i had to put in a higher fuse number, but yea i used the relay they included.

Johnny, glad to see you are almost done!
Lights look good, fix that license plate - it's bent. Re-clearcoat your roof, and you're good!

Did you have a gap on the outer edge of the fog lights after install, as if they were not tight enough to the bumper?

yea my license plate got bent from an accident when i rear ended someone, so thats why it looks like that.

is there a DIY on how to re-clearcoat my roof, cuz i dont rreally have the funds to redo it unless its really cheap somewhere, i also have other cancer spots on my trunk also.
 

1NonlyAccord

Well-Known Member
Joined
Aug 5, 2008
Posts
2,389
Reaction score
22
Location
GA
Can the actuall fog light come off the plastic shroud?like the yellow oval plastic peice along with everything..or is it bonded into the shroud?
could possibly cut if out with out damage?
 

1NonlyAccord

Well-Known Member
Joined
Aug 5, 2008
Posts
2,389
Reaction score
22
Location
GA
Can the actuall fog light come off the plastic shroud?like the yellow oval plastic peice along with everything..or is it bonded into the shroud?
could possibly cut if out with out damage?
 
Back
Top