DIY 01-03 JDM Civic Fog Lights

[johnnydinh701]

does anyone know where the "red wire with blue stripe" goes? i kinda have an idea of where the "red wire" goes now but i need to know where the other one goes?

http://img.photobucket.com/albums/v257/vi3txninja/_MG_5069-1.jpg

 

[nyknick1015]

i think they just stay open... I got mines today and it came with instructions and i think those are for minor accessory options... because on the instructions, they dont go to anything

 

[johnnydinh701]

but that wire connects to the relay....

so all i have to do is power the "red wire" to the positive and ground all the black wires??

 

[nyknick1015]

yea, thats pretty much it. On the instructions, it doesnt connect those to anything at all... and those extra arent main connectors so i wouldnt worry about it too much, im gonna follow the instructions and put mines in and then tell u how it worked out... i got mines from ZenMotorsports

 

[johnnydinh701]

do u have teh same wiring diagram as me

 

[Russianred]

Yeah man, mine's the same. Instead of having one ground for each fog, I combined the two grounds so I would have one grounding point. Been working well for me so far.

 

[nyknick1015]

i got that but i got a little booklet too... it has instructions in words only...

 

[johnnydinh701]

so u get installed yet?

 

[Bond4387]

Check this out if you're hardcore about being OEM.
H and A ftw
http://www.handa-accessories.com/accord/accord014dfoglights.pdf

 

[johnnydinh701]

alrite i finally figured it out......

i will post pictures up later but here what did and it worked...

1. ground all the black wires..
2. pull the "red wire" out of the plastic and connect or wire that together with the "red wire with blue stripe"
- when those two wires are connected or twisted together, tap those wires to the "red wire with black stripe," which is the trigger wire, that is connected to your cruise control button.
3. then turn on your lights and then your done...