DIY - detailed interior upholstering

blaque~akkord

Well-Known Member
Joined
Oct 5, 2007
Posts
297
Reaction score
2
Location
socal
ok thanks to everyone...hope this info will help alot of members...
so answering all the question at once... i cant take a picture installed to the car until i get the car back from the shop...i'll be posting DIY for the fabric painting soon as i can...

***some may ask why i did not sand the pieces... i tried it but it didnt came out pretty well using the krylon paint its just gonna roughen the plastic.

btw i'm done with the insert today please see picture below...DIY will follow tomorrow night after work....

here you go...:beer2::beer::beer2:




sampi03.jpg
 

I4 CG5

Well-Known Member
Joined
Sep 25, 2007
Posts
766
Reaction score
3
Location
Fargo, ND
Very nice write up :thumbsup:

So you were able to paint the speaker grilles and the paint didn't plug any of the holes?
 

mxjoe388

Well-Known Member
Joined
Oct 13, 2007
Posts
564
Reaction score
0
Location
Holly Springs GA
doin mine right now will post pics in a bit.doin the door panels blck on bottom gray middle and black on top
 

mxjoe388

Well-Known Member
Joined
Oct 13, 2007
Posts
564
Reaction score
0
Location
Holly Springs GA
i got dupli-color vinyl and fabric paint for 5 bucks a can and did 3 coats on the fabric and 2 coats on the plastic and vinyl.u have to rub your hand around on the fabric to get it all unstuck together after it drys.ill take a pic of the drivers door its the only one thats fully done
 

mxjoe388

Well-Known Member
Joined
Oct 13, 2007
Posts
564
Reaction score
0
Location
Holly Springs GA
ok so heres the driver side door done minus the little lock pin. there are a couple tears in it from b4 i got it but w/e
PICT0574.jpg


PICT0576.jpg
 
Last edited:

Latest posts

Back
Top