h22a4 question

[604ACCORD]

This might be a stupid question but I'm going to look at a h22a4 tonight I think its out of a 98 prelude sh. Can I use this year of h22 or am I better off to find one from a pre 97

 

[agginline86]

This might be a stupid question but I'm going to look at a h22a4 tonight I think its out of a 98 prelude sh. Can I use this year of h22 or am I better off to find one from a pre 97

search

 

[RedRyder]

I've heard stay away from the SH, but there's plenty of info on H motors here so give it a search.

 

[f20bcg3]

Ive actually heard the same idk if its a myth but ive also heard they will not bolt up to our trans but havent ever tries for myself

F20Bs don't take prisoners they chop faces off!!

 

[Jarrett]

The Prelude SH has a separate assembly for the ATTS that mounts on the back of the block. It essentially does away with the standard intermediate shafts and therefore won't have all of the correct points to mount the shaft. You'll need an adapter plate made that bolts in place and gives you mounting bosses for the intermediate shaft. You'll also need a water pipe from a non-SH Prelude as that's another main difference on the back of the block for the SH H22A4. The different sensor locations can be worked around by extending wires if needed. All in all, it's not a worthwhile swap. H22As are dirt cheap and devoid of all of the SH hassles.

 

[f20bcg3]

The Prelude SH has a separate assembly for the ATTS that mounts on the back of the block. It essentially does away with the standard intermediate shafts and therefore won't have all of the correct points to mount the shaft. You'll need an adapter plate made that bolts in place and gives you mounting bosses for the intermediate shaft. You'll also need a water pipe from a non-SH Prelude as that's another main difference on the back of the block for the SH H22A4. The different sensor locations can be worked around by extending wires if needed. All in all, it's not a worthwhile swap. H22As are dirt cheap and devoid of all of the SH hassles.

aha ..... so it is true

F20Bs don't take prisoners they chop faces off!!

 

[Jarrett]

What you said previously? No, it's not. They will bolt up to the Accord transmission. I think you're confused about the intermediate shaft and a transmission being the same thing.

 

[f20bcg3]

Umm no i was just stating what i had heard and confirming what u had stated it was just something i heard about it having to do something with something not bolting up right but hey u know more then me but i do know the difference between a tranny and a shaft

F20Bs don't take prisoners they chop faces off!!