Need Help mounting a mugen lip onto Honda Accord 2001

[rick_dang1987]

Hi, i really need your guys help!!! I recently just bought a mugen lip on ebay from Bayson R and i'm having troubling installing it on my Honda Accord 2001. I know i have to modify the lip to fit my accord but i really dont know where to start. Can one of you explain to me how to do it.

Thanks in advance

 

[truWarier02]

You have to cut slits on the center tab where it enters the lower grille. And you might have to cut slits on the two corners of the lip so the lip wouldn't be so tensed.

Does that help?

 

[blackcord]

I just had to trim a bit off the centre piece (on the ends). I didnt cut slits.

 

[rick_dang1987]

ok thanks guys, i will try to cut it by myself. hopefully I don't need to buy new ones

 

[RedRyder]

There are a couple DIY's on here about lips people have custom fitted to their cars, they may not be in regard to your exact one, but it may give you some ideas and guidance. Good luck.

 

[hirichard]

give me your 01 bumper and ill give you my 99 coupe bumper and itlll fit

 

[blackcord]

I just had to trim a bit off the centre piece (on the ends). I didnt cut slits.

My bad dude. I mis-understood you when you mentioned slits. Yes I did have to cut slits. See my pic here. This should give you a better understanding of how it fits.

 

[v6indodarknight]

^ all of that... and pull hard... and harder... and harder... til the hardest u can do...

 

[rick_dang1987]

there we go, thats wat i want to look at lol
thanks!

 

[DrOwZee]

^ all of that... and pull hard... and harder... and harder... til the hardest u can do...

That's what she said