OFFICIAL 6GA tech/mechanic network

[BLACK SUNSHINE]

Hey add this one for the southeast, this is my fathers shop where i work......

Perry brothers tire.....102 pinehurst ave Aberdeen,North Carolina.....
ask for jason...... i give half price alignments, wheel balancing etc to all 6ga members who come and ask for me....if u need tires or a tune up come see us....

 

[kn106518]

ken doesn't work at TOP Tune anymore, idk if it is worth to go there now.

 

[kn106518]

oh any good cheap alignment place in socal?

 

[Drift]

You can add me to that list. We're just outside of Boston MA.

DENT Sport Garage
61 Endicott St Building 26
Norwood MA 02062

Ask for Nick.

Check the site out in my sig. We do a ton of custom work. We mostly do race cars for SCCA, club racing, Rally America. But we also do a ton of street cars and general maintenance.

 

[SteadFast]

For anyone in DE, MD or eastern PA/ maybe even NJ...
My roommate and I work out of our garage here in DE.
We have a 5 car garage, with almost every tool but a lift. We are available to do wheels/tires/suspension/engine/brakes/mechanical work, some performance and general maintenance. Not only do we build honda motors, but we know our way around domestics too. As well as car audio/video/electronics. We do NOT do body work, painting, or tinting.

Rates are great, my roommate is a UTI grad, and we have been playing Honda's for 6+ years. We typically work weekends here, and our full time jobs during the week. We can also teach you how to do your own maintenance, or you can have us do it while you enjoy our flat screen TV, PS3, and beer.

I also offer a full line of detailing services.

Contact Info-
Marc- PM here for detailed info (cell, email)
Zip for reference- 19968

 

[juicebox00]

If anyone in SoCal needs work done me and my friends will do it cheap but still do it well. We can do most stuff from Black housing headlights to installing suspension. We're also located in the Pomona and we do all the work out of my friends garage at his house. pm me or email me at [email protected]

 

[dadams]

For those midatlantic ppl
Hondamans
8199 Richie highway
Pasadena, MD 21122

410-544-0566 and ask for Patrick
http://www.hondamans.com/Home.html

 

[Atreidies]

For South Texas/Houston Area -

International Garage
5823 Star Lane
Houston, TX 77057
(713) 269-4724

We do anything from oil changes to custom swaps. Current shop project is a right hand drive swap ITR turbo. Custom body work/paint is available too. Rolled fenders, seamless body kits(that won't crack), shaved handles. Ask for Craig and I can give you a good discount.

 

[finch13]

Twin Cities Metro:

Greg's Automotive
4737 Minnehaha Ave.
Minneapolis, MN 55406

I work 1:30 to close everyday if you want me to do the work, otherwise we're open 8-5. I can't give out discounts, but if you need reliable, quality work done at a decent price we're the place to go!

 

[Russianred]

Midwest Services Now Offered!

Dear New England Area Members:

Here are listed some of the things that I am capable of doing to perfection. If you have a task in mind that is not mentioned, please PM me and we can discuss it.

I am also available to offer my skills for engine projects such as head gasket replacement, valve cover gasket replacement, and more extensively any 4-cyl. swapping or turbo-related work.



Regular Maintenance:

$25 • Oil change
$15 • Spark plug replacement
$35 • Distributor, rotor, wire replacement
$35 • Transmission fluid replacement
$40 • Brake fluid flush and replacement
$50 • Brake pad / caliper replacement
$100 • Brake shoe / drum replacement
$50 • Fuel pump replacement
$30 • Multiplexor replacement
$45 • Starter replacement
$45 • Alternator replacement
$55 • Front / rear rotor replacement
$30 • Radiator replacement
$60 • CV axle replacement



Cosmetic Modification:

$75 • Blackhousing headlights
$80 • Sidemarker installation
$120 • Valve cover refinishing and painting
$45 • Trim black-out
$65 • Fog light kit installation
$35 • OEM foglight switch retrofit to any fog light kit
$45 • Hood damper installation
$45 • Tail light tinting
$50 • Compatible steering wheel swaps
+PM • Accent lighting (interior and exterior) kit installation and custom kit fabrication
+PM • Bumper, hood, trunk, door, fender installation
+PM • Interior removal / installation
+PM • Lip, bumper kit, and wing installation



Suspension / Chassis Upgrades:

$35 • Strut bar installation
$50 • Tie bar installation
$60 • Sway bar, endlinks installation
$150 • Spring / strut installation
$120 • Coilover installation
$75 • Brake line replacement or braided line installation
$65 • Camber kit installation



Performance / Engine Modification:

$30 • Engine grounding kit installation
$ • Engine torque damper install and/or custom reinforced bracket fabrication
$50 • Short shifter (stock shifter modded and rethreaded)
$25 • Short shift adapter installation
$35 • Cold air / short-ram intake installation
$40 • IACV cleaning and replacement
$55 • Mechanical or electrical gauge installation
$120 • Header / catback exhaust system installation
$50 • Throttle body installation
$30 • Oil catch can installation
+PM • Complete OBD2b to OBD1 conversion



All of the above maintenance and modification has been performed on my own sedan, or another 6thgen. As a testament to my skill, please take a look at all of my pictures, DIY’s, and technical information posted on this forum. My Accord-specific experience (6 years) has come from performing all the work on my own car myself, and subsequent installations and projects for other members. My overall automotive experience began exactly 12 years ago.

Currently, I provide service for the Maine, New Hampshire, and Eastern Massachusetts areas, but am not strictly limited to them. I can travel all of New England, and more for special circumstances. I’d like to offer my services to not only provide professional quality installation and modification, but also to teach those that want to learn, and make life easier for those that don’t have the time for it. My skills come at a price much less than a tuning shop, dealership, or mechanic - but I guarantee consistent quality of my work. As a result, the completed projects come out the way you want them, at an unbeatable price.

Please PM me about any questions or project requests, and also if you need any specific pictures of my work or references. Thank you.

- Nikita
- 12/12/11

[email protected]
(207) 604-0339

AIM: I A NIGHTMARE I

6GA Mechanic Thread