Something wrong with air tools?

[TheHunter]

125 is definitely enough to take off a lug nut. You'll figure it out, i'm sure that you just have the regulator turned down like they said.

 

[finch13]

Most garages operate at 120psi but have at least 100 gallon tanks which means they flow a lot which is more important than pressure.

Really? I don't understand why... most air tools say not to exceed 90psi... is this geared towards DIY mechanics who don't have inline oilers and air.water separators or what?

 

[Drift]

What size air line do you have coming to the impact gun? Im assuming its a 1/2" drive gun.

 

[pyaarawala]

What size air line do you have coming to the impact gun? Im assuming its a 1/2" drive gun.

It's a regular 1/2" drive gun. The air line is really thin actually. probably like half a cm or something. It came with the compressor kit.

 

[toast]

you should be using at least 3/8" hose..

 

[Drift]

It's a regular 1/2" drive gun. The air line is really thin actually. probably like half a cm or something. It came with the compressor kit.

You need a bigger hose. I assume the one that came with the kit is a coil type. Those are fine for nail guns and ****, but not impacts.