Teaserrrr **UPDATED** WHEELS MOUNTED!!

[swollen_cu]

Re: Teaserrrr

how much you want for the liners?

Lol idk really know Monty.... One part of the liner is kinda burned off because a clip fell out while I was on the highway.. Haha I'd be glad to sell it to you if you still wanted it haha just pay for shipping

 

[1NonlyAccord]

Re: Teaserrrr

PMd so I wont off topic thread.

 

[pattywak]

Re: Teaserrrr

I've heard that with stretched tires you have to run higher PSI in the tire. Is this true? What are you running in yours?

 

[swollen_cu]

Re: Teaserrrr

I've heard that with stretched tires you have to run higher PSI in the tire. Is this true? What are you running in yours?

probably 36psi But if I need to run 40 I will.

 

[truWarier02]

Re: Teaserrrr

swollen, I'm running -2.4 and -2.9 natural camber on the rear right now with those 17x9's. I think my tire rubs the strut/coilover on the side with -2.9 when I roll over a dip or go up a driveway that puts more pressure on that side of the wheel. It ain't too bad but I'm just giving you a heads up. The other side with -2.4 doesn't rub the strut or anything so around -2.5 should be good enough to have these fit pretty flushed just to let you know!

 

[swollen_cu]

Re: Teaserrrr

swollen, I'm running -2.4 and -2.9 natural camber on the rear right now with those 17x9's. I think my tire rubs the strut/coilover on the side with -2.9 when I roll over a dip or go up a driveway that puts more pressure on that side of the wheel. It ain't too bad but I'm just giving you a heads up. The other side with -2.4 doesn't rub the strut or anything so around -2.5 should be good enough to have these fit pretty flushed just to let you know!

hmmm thanks for the heads up! I think im at -2.7 in the rear. I will definately look into this though. And are you sure it's not the rear bumper tab?

 

[truWarier02]

Re: Teaserrrr

Hmm.. it could be! The guy that rolled my fenders also dremeled out the piece of the bumper tab that's sticking out. I didn't think that was the part that's rubbing but I'll check.

 

[9450erick]

Re: Teaserrrr

I was gonna get these exact rims but in gold
I fell in love once I saw them
haven't purchased them yet(it's on my to due list) lol but it's gonna be cool sein them on another accord before I put them on myself

 

[CG6Lemon]

Re: Teaserrrr

faster....

 

[purplehaze]

Re: Teaserrrr

Hmm.. it could be! The guy that rolled my fenders also dremeled out the piece of the bumper tab that's sticking out. I didn't think that was the part that's rubbing but I'll check.

i actually had to dremel into the metal part thats on the chassis when i did mine. to me if your bumpers still bolted on in the same spot its probably that. did the dude drill another hole for you farther back in the bumper to hold it on?