Track Bumper [1st Post Updated 12/4/11]

[GoldnKnight22]

Re: Track Bumper [1st Post Updated 2/2/11]

Yeah, they most definitely do. And they're cheap. #3, 4

http://www.hondaautomotiveparts.com...DR+EX+(V6)&catcgry4=KA4AT&catcgry5=BUMPER+(2)

 

[itzcharlie]

Re: Track Bumper [1st Post Updated 2/2/11]

do they sell covers that go in the foglight holes? as if u didnt want to use fog lights

yeah its fog light deletes

 

[MikeyMike]

Re: Track Bumper [1st Post Updated 2/2/11]

Nice, I'm thinking about just shaving the right side off and making that flush also.... The left side is mostly covered by the velocity stack... Im starting to like the way this thing is coming out lol

 

[CrosCntryAccord]

Re: Track Bumper [1st Post Updated 2/2/11]

interested to see how function this is

 

[MikeyMike]

Re: Track Bumper [1st Post Updated 2/2/11]

well the radiator is mainly fed from the bottom,and the 02 grille is the same width as the condensor and radiator.. after im done, im going to drive around with it on and see how it cools.. but im not going to get a full result since its like 15 degrees around here

 

[talontsiawd]

Re: Track Bumper [1st Post Updated 2/2/11]

The foglight "block off plates" have "honey comb" texture to them. They are not flat at all, just so you know. You may want to either fill them, or make fiberglass piece that is smooth.

Here is a pic of my car to show you, it is hard to see. Plus, if you use photoshop, you can use this pic to mess around with.

 

[MikeyMike]

Re: Track Bumper [1st Post Updated 2/2/11]

The foglight "block off plates" have "honey comb" texture to them. They are not flat at all, just so you know. You may want to either fill them, or make fiberglass piece that is smooth.

Here is a pic of my car to show you, it is hard to see. Plus, if you use photoshop, you can use this pic to mess around with.

Ya I realized that the block offs are honey combed... I already cut the piece to smooth it out flush from an old bumper lying around the shop.. I've just been busy now I havent gotten around to molding it in.. Update soon

Ps Ty for the pic, I'll mess with it a little tonight

 

[Russianred]

Re: Track Bumper [1st Post Updated 2/2/11]

Coming along great man! Is there any roundness/convexity to the filler on your grille to flow with the bumper lines? I couldn't tell from the pic. That's a 'tool' move, to leave one's tools on a fresh piece of craftsmanship..

 

[MikeyMike]

Re: Track Bumper [1st Post Updated 2/2/11]

it curves in the shave of the bumper... if thats what your asking

 

[Daheavyking]

Re: Track Bumper [1st Post Updated 2/2/11]

Can't wait to see your car run this season!!!!!!