UPDATED w/ new pics Painting Interior trim..

[KnightRyder]

Re: UPDATED Painting Interior trim..

2000 will work but it'll take a while, i used 1000 but then again i made sure i sprayed on a heavy *** coat of clear so that when i sanded, i'd still have plenty of clear left because unfortunatly i had to redo one of my piece because the clear was so thin, its started sanding the paint and primer layers and by the time i realized, i was back down to woodgrain in one corner

 

[johnnydinh701]

Re: UPDATED Painting Interior trim..

look wat i jsut did

i used the krylon fusion paint and it came out okay

sorry for the krappy phone pics

 

[johnnydinh701]

Re: UPDATED Painting Interior trim..

yea the little spots or specson the top left of the cup holder is from an air freshener that leaked out. i guess it was corrosive or acidic or something cuz it ate though the plastic and i tried to sand it all out until it was all leveled but it i couldnt. but as you can see in the first picture its barely notice able, it depends on the angle that you look at it.

 

[johnnydinh701]

Re: UPDATED Painting Interior trim..

i was thinking of painting it dark blue instead cuz i saw another person do that on here or v6p.net but do u think blue would look bad on tan interior

 

[iROYAL]

Re: UPDATED Painting Interior trim..

i was thinking of painting it dark blue instead cuz i saw another person do that on here or v6p.net but do u think blue would look bad on tan interior

blue with tan...nah...

 

[johnnydinh701]

Re: UPDATED Painting Interior trim..

yea i tihnk it was either this forum or v6p but its the guy that did like a supra tail light conversion and he painted his interior pieces blue and it looked pretty good on the tan interior but i cant find that thread.

 

[00blackedaccord]

Re: UPDATED Painting Interior trim..

well i finished the back two door pieces and this is how they came out.

now moving up to the front to take care of those...
the drivers piece is a little more difficult to get out than the other pieces due to more buttons but mainly just the mirror adujustment piece...

so now im rollin around with that messed up in the front for now ha...
but im slowly workin through the pieces..getting better with each piece i think.

 

[KnightRyder]

on the coupes you have to pull the entire door panel off to get the trim pieces out sedans have it easy

 

[00blackedaccord]

its just one screw then a little work to get it loose then just unscrew the switches etc. and the little cubby hole area. not too bad...

 

[nexTOme]

looking nice

im gonn start doing this once i get a new job.....
new job=better hour=more time to work on car