What'd you do to your accord today?

sonni_kuba

6GA Supporting Member
Joined
Aug 21, 2011
Posts
548
Reaction score
1
Location
Toronto
What engine is in the 2009 accord v6 coupe? What r the specs? .... because one got its face chopped off in the 1/4 mile by my f20b( took her to the strip so she could let her hair loose)

F20Bs don't take prisoners they chop faces off!!

From Wikipedia .... http://en.wikipedia.org/wiki/Honda_J_engine

J35Z2
2008-2012 Honda Accord (except V6 6MT coupe)
Displacement: 3,471 cc (211.8 cu in)
Bore and stroke: 89.0 mm (3.5 in) x 93.0 mm (3.7 in)
Compression: 10.5:1
Power, torque: 271 hp (202 kW) @ 6200 rpm; 254 lb·ft (344 N·m) @ 5000 rpm
Valvetrain: 24v SOHC i-VTEC
Fuel control: Multi-point fuel injection; PGM-FI

J35Z3
2008-2012 Honda Accord V6 6MT coupe
Displacement: 3,471 cc (211.8 cu in)
Bore and stroke: 89.0 mm (3.5 in) x 93.0 mm (3.7 in)
Compression: 10.0:1
Power, torque: 271 hp (202 kW) @ 6200 rpm; 251 lb·ft (340 N·m) @ 5000 rpm
Valvetrain: 24v SOHC VTEC
Fuel control: Multi-point fuel injection; PGM-FI

Maybe I missed your members ride thread, but what kind of mods have you done to your f20b ?
 

Brad2274

Well-Known Member
Joined
Jul 18, 2011
Posts
1,388
Reaction score
4
Location
Melbourne, FL
Installed adjustable rear lower control arms, with homemade lockout kit, went got alignment, also installed my moog endlinks, and switched to a stiffer setting on my sway bar. Was planning to go lower, but didn't get to roll the rear fenders today. Thinking about just shaving them. Any suggestions?
what arms did you get?
 

f20bcg3

Well-Known Member
Joined
Oct 11, 2013
Posts
527
Reaction score
2
Location
clinton nc
Maybe I missed your members ride thread, but what kind of mods have you done to your f20b ?


It was a 5 speed autotragic (i know it was at a disadvantage but he challenged me) i have a exedy light weight flywheel with stage 1 exedy clutch ,aem alt pulley, ebay cai, and a good tune from my buddies at rising customs in the ville,nc everything else is stock besides my after market 3a racing muffler.... and i need to find a good camera to make a good members ride thread i have a nit picky way of being

Correction: its a Fidanza lightweight flywheel

F20Bs don't take prisoners they chop faces off!!
 
Last edited:

Poko

Member
Joined
Mar 29, 2014
Posts
19
Reaction score
0
I washed and waxed her then I kissed her and thanked her for all her loyal service over the years since I got her brand new. My 1997 Honda Accord EX.

tary2ary.jpg

mevaguhu.jpg
 

Igor

Under construction
Joined
Nov 16, 2013
Posts
384
Reaction score
0
Location
Florida
what arms did you get?

Ingalls...I had them for like 6 months now, and never got to install them...I really like the shiny custom RCAs a member here offering, but I already had these, and my only issue is that those all metal, mines got rubber in it, like stock arms, which he mentioned is their downfall. But my stock 13y.o arms still had no problems with rubber, so I guess we'll see
 

Jdmj30a1

Well-Known Member
Joined
Apr 2, 2013
Posts
187
Reaction score
1
Location
Oxnard
Disappointed on my paint for the wings west lip kit didn't end up matching my championship white came out like taffeta white might sell it now :mad3:
 

Sil2DrV6

Well-Known Member
Joined
Oct 15, 2012
Posts
1,803
Reaction score
51
Location
USA
Found this on ebay, and placed an order.


_57_zps99e78a37.jpg



Says universal and, as far as it looks, it should be mounted in a replacement of the oem bracket. This would be more secure than being zip-tied imo. Hopefully I can keep the bumper cover undrilled and stay away from having troubles w/ cops & border guys in Canada.

Haven't been pulled over for 7 months since I became plate-less, but I think it's just a matter of time when it's my turn. :coffee:
 
Last edited:

sonni_kuba

6GA Supporting Member
Joined
Aug 21, 2011
Posts
548
Reaction score
1
Location
Toronto
Found this on ebay, and placed an order.


_57_zps99e78a37.jpg



Says universal and, as far as it looks, it should be mounted in a replacement of the oem bracket. This would be more secure than being zip-tied imo. Hopefully I can keep the bumper cover undrilled and stay away from having troubles w/ cops & border guys in Canada.

Haven't been pulled over for 7 months since I became plate-less, but I think it's just a matter of time when it's my turn. :coffee:

Look's good, I'd like to see how it look on our cars.
 

sonni_kuba

6GA Supporting Member
Joined
Aug 21, 2011
Posts
548
Reaction score
1
Location
Toronto
Got sick of the poor output on my rear sidemarker bulbs ...

IMG-20140610-00488.jpg


So, I ordered some of these

IMG-20140610-00487.jpg


from here ... EBay for $2.58

Looks a lot nicer now

IMG-20140610-00489.jpg


Was going to get some night shots, but right now we've got some sort of mosquito infestation ;)
 
Last edited:
Back
Top