Wheel Fitment Thread

danmccormick87

Well-Known Member
Joined
Mar 29, 2014
Posts
420
Reaction score
2
Location
Halls, TN
Hope this is the right place to post this... Does anyone know if the Nissan Cube OEM Rim #62532 will bolt up to our cars?
 

truWarier02

Well-Known Member
Joined
Oct 30, 2008
Posts
4,481
Reaction score
28
Location
Los Angeles
I don't see why not. If it's 4x114.3 (4x4.5) then it will bolt right on. The hub diameter is likely different than our's but nothing a hubcentric ring can't fix; unless their hub diameter is smaller than 64.1mm of course. :thumbsup:
 

danmccormick87

Well-Known Member
Joined
Mar 29, 2014
Posts
420
Reaction score
2
Location
Halls, TN
I don't see why not. If it's 4x114.3 (4x4.5) then it will bolt right on. The hub diameter is likely different than our's but nothing a hubcentric ring can't fix; unless their hub diameter is smaller than 64.1mm of course. :thumbsup:

Thank you! I know the bolt pattern was the same, but wasn't sure of our hub diameter. I know the Cube has a 66.1mm hub diameter, so I guess I am going to get these rims, and go for a meaty, stretched look. Of course, they will be powdercoated black :rotflmao:
 

Gmoney

Well-Known Member
Joined
Jul 18, 2013
Posts
105
Reaction score
2
Location
NJ
Thank you! I know the bolt pattern was the same, but wasn't sure of our hub diameter. I know the Cube has a 66.1mm hub diameter, so I guess I am going to get these rims, and go for a meaty, stretched look. Of course, they will be powdercoated black :rotflmao:


Should post some pics sounds like an interesting set up


Sent from my iPhone using Tapatalk
 

blackhawksfan18

Well-Known Member
Joined
Dec 30, 2013
Posts
182
Reaction score
1
Location
Chicago, IL
Alright 17x9.75 rim was thinking of either 205/40r17 205/45r17 or 215/40r17. Which one is best? Will be at maybe a 3"-3.5" drop
 

dumpedseegeesix

Active Member
Joined
Aug 15, 2012
Posts
29
Reaction score
0
Location
En Jay
What's going on quick question..are any of you running a 18x9.5+15 in the front without a camber kit? I recently acquired some wheels with that offset in the front..I'm trying my hardest to not run a camber kit..I am already rolled with a slight pull in the front..I will be running 215.40.18 tires also and the drop I will have will be about 3-3.5in in the front apox. Please let me know if a kit is needed in advance thanxz!
 
Back
Top