Wheel Fitment Thread

[truWarier02]

I have my finder lips rolled and a drop of -1.9f and -1.75r

I plan to get pf01s in 17x8.5 + 40 et. I want the tires to be flush with the wheel and a one finger gap between the tire and fender. What size tire do I need?

Tire flush with the wheel... meaning no stretch? You'll need 225/45. It might have a very slight stretch, if any, depending on tire brand & model. It will be barely noticeable nonetheless.

 

[hondatech03]

that is want I wanted. thank you. I gave you a rep point.

 

[rdxd]

17x9.75 +25 front
17x9.75 +23 rear
225/45/17

Xxr 527
Ill def need fender rolled, and rear bumper relocated
Will I need spacers?
For the 98 sedan 4x114.3
Thoughts?

 

[soccerchamp16]

17x9.75 +25 front
17x9.75 +23 rear
225/45/17

Xxr 527
Ill def need fender rolled, and rear bumper relocated
Will I need spacers?
For the 98 sedan 4x114.3
Thoughts?

You'll need your fenders rolled and pulled along with the tab relocated.

You will have to run a decent stretch if you want to be low

 

[rdxd]

You'll need your fenders rolled and pulled along with the tab relocated.

You will have to run a decent stretch if you want to be low

hmmm thanks - i didnt consider needing a pull - would this be okay for a daily?

 

[soccerchamp16]

hmmm thanks - i didnt consider needing a pull - would this be okay for a daily?

Most of the people on here daily their accord and if they are running wide tires with lower offset their fenders are most likely pulled. Mine are pulled a lot.


Sent from my iPhone using Tapatalk

 

[chino581991]

17x9.75 +25 front
17x9.75 +23 rear
225/45/17

Xxr 527
Ill def need fender rolled, and rear bumper relocated
Will I need spacers?
For the 98 sedan 4x114.3
Thoughts?

How low do you plan on being? I have 17x9 +12 w/ 215/45/17. Fenders rolled/pulled and bumper tab relocated. I still need to pull my fenders a little more and possibly trim some metal off the back because I still rub. I'm dropped about 23 1/2 all around if this gives you an idea of what your're looking for

 

[xKevo]

I suggest getting a set of 215/40 and eliminating all wheel gap or 23.5" fender-to-ground. Relocate rear bumper tab too.

sounds good i think im gonna go with that thanks

 

[danielkkm]

Im planning on getting some mb battles. Has anyone had issues fitting
18x8 +43 offset on the coupe accords? My year is a 2000. Im not planning to slam my car, but definitely going for a coilover set up. Planning to stance and have a one finger gap. Will it look pretty flush? I do want some poke, but not too much. Im thinking of 225/40 all around. Seem possible guys?

 

[DrOwZee]

With a one finger gap, its totally possible. Wont be flush though