White6GAV6
Well-Known Member
215/45 would be fine. Depends on the fitment you're going for. If you want more stretch go with a 205/45
Wheel Fitment Thread
- Thread starter xci.ed6
- Start date
Alfonsom95
Member
I have 215/45 but I seen accords with that and they stick out too much, I want the tire small enough to be tucked but don't know which one
What brand of tires are you looking at..each kind of tire stretches different
Www.Stancewars.com ★ July 5th 2014 ☆
Www.phantasykolors.com
truWarier02
Well-Known Member
QFT. I just got a pair of 215/40 Federal SS595 and they run a bit wide compared to my Hankook v12. They'rw actually about 220mm wide whereas the v12 are about 217mm. Sometimes a few mm can mean the difference between rubbing or not rubbing depending on your setup.
Word of advice, and I just found out about it, is to google the name and the size of the tire followed by the words section width (i.e Federal SS595 215/40 section width). Open up a link and it should show you the actual section width in inches like 8.7".
Very useful.
Alfonsom95
Member
Fasho man thanks, ima go look it up right now. They're mounted on 215/45 and it looks way to big so I didn't bother putting them on my car yet
White6GAV6
Well-Known Member
EscoStylez is running a 215/40 on 9.5. Check his ride thread to see what his looks like. Or pm him. I know he's running Nankang NS-20
I have the same tires, 215/35/18, the federal ones
Www.Stancewars.com ★ July 5th 2014 ☆
Www.phantasykolors.com
Drew707
Well-Known Member
Prolly been asked before but 17x8 tl wheels on 205/45 23.5in lowered what kind of fender work if need any?
RedRyder
Save the manuals
^if anything, a roll. And shave tab a little.
Alfonsom95
Member
Nothing major just a roll so it won't rub much since you're lowered
