5thGenAccord
Well-Known Member
- Joined
- Jul 24, 2006
- Posts
- 104
- Reaction score
- 0
The H23 and F22 are only here because of their stroker possiblities thats all. The F23 could swap to a bigger aftermarket crank and run 2.5-2.6 liters even though this will require some boring. I'm sure Rod ratio is a bitch on these stroker kits. Even though it does say the bottom end can handle 9k+++ rpms . I don't know how though.
As far as use just a crank swap to make power check this out>>> http://www.honda-tech.com/zerothread?id=1399259&page=1
I think thats a HUGE bump in power.
As far as use just a crank swap to make power check this out>>> http://www.honda-tech.com/zerothread?id=1399259&page=1
I think thats a HUGE bump in power.