Wheel Fitment Thread

jeremykta

Member
Joined
Apr 13, 2015
Posts
8
Reaction score
0
Location
Wisconsin
No, I wasn't the one that asked that question. I was talking about my question above about the tire fitment.
 

Trippinsolzz

Well-Known Member
Joined
Apr 21, 2015
Posts
52
Reaction score
0
Location
Charlotte Nc
Stock height atm looking to get lowerd a bit can someone help me pick some deep dish wheels that will fit I got a 2000 v6 coupe
 

xci.ed6

Well-Known Member
Joined
Sep 5, 2007
Posts
2,909
Reaction score
9
Location
Tampa Bay
Yeah, my previous post was about the lug swap.

As for wide wheels, I have had no problem with 9's. Rear are like +35 or something. The front I added a 1/8" spacer.

I bought 'em on ebay, they were listed for a 350z and they thought my tire choice was odd :p
 

Trippinsolzz

Well-Known Member
Joined
Apr 21, 2015
Posts
52
Reaction score
0
Location
Charlotte Nc
ok So Thread im looking at some xxrs but i want 18x9 or 18x9.5 i have ff type 2s but i havent installed so im stock height what size tire would fit nice this is my daily btw and how low should i go ? ive never driven a slammed car but im very carful on the road help me out:lock::Boo:
 

Jordan_H

Well-Known Member
Joined
Aug 4, 2013
Posts
807
Reaction score
3
Location
Washington State
ok So Thread im looking at some xxrs but i want 18x9 or 18x9.5 i have ff type 2s but i havent installed so im stock height what size tire would fit nice this is my daily btw and how low should i go ? ive never driven a slammed car but im very carful on the road help me out:lock::Boo:

205/40 or a 215/40. Can go with a 35 sidewall if you like a slightly bigger tire. To look right you're going to want to go pretty low. Install the coilovers at a decent height the gradually go lower as you learn to drive a lower car. Good luck
 

phi1542

Well-Known Member
Joined
Feb 5, 2013
Posts
715
Reaction score
1
Location
Sacramento, California
I'm looking at some wheels rn and I have 2 in mind. 18x9 +40 how would that fit and what tire? Also 18x9.5 +22 or +12? Idk which offset to choose. Also tire?

Sent from my SAMSUNG-SM-N910A using Tapatalk
 

puzzlemaster94

6GA Connoisseur
Joined
Jun 6, 2012
Posts
1,508
Reaction score
11
Location
Louisville Area
I'm looking at some wheels rn and I have 2 in mind. 18x9 +40 how would that fit and what tire? Also 18x9.5 +22 or +12? Idk which offset to choose. Also tire?

Sent from my SAMSUNG-SM-N910A using Tapatalk

With +40 and x9, you'll fit that with probably just a roll. On the 9.5 +22, that'll fit just like my Nue's, just 3mm more outward.
-For me, that was a roll, bit of a pull, and shaved bumper tabs. You'll need some camber in there too.
With the +12, just another 10mm out from the +22.

What wheels are you looking at?
 

phi1542

Well-Known Member
Joined
Feb 5, 2013
Posts
715
Reaction score
1
Location
Sacramento, California
With +40 and x9, you'll fit that with probably just a roll. On the 9.5 +22, that'll fit just like my Nue's, just 3mm more outward.
-For me, that was a roll, bit of a pull, and shaved bumper tabs. You'll need some camber in there too.
With the +12, just another 10mm out from the +22.

What wheels are you looking at?
Ok thanks! I'll probably get the 9 or 9.5 +22. With the 9 +40 will it have a nice stance though? And what about tire size? I'm looking at these haha white on black...

http://pages.ebay.com/motors/link/?nav=item.view&id=131500539189&alt=web

http://pages.ebay.com/motors/link/?nav=item.view&id=111743772973&alt=web

Is the 18x9 +40 gonna sit like my current setup or more sunk in? I want a good stance. My current setup is 17x8 +45 with 15mm spacer front 20mm back. 3rd ten tl wheels I think that's the specs

78929c56734e2a38fe1c3c3342b91bd4.jpg
 
Last edited:
Back
Top