Unoffcial 5Spd swap list

9450erick

Well-Known Member
Joined
Oct 12, 2009
Posts
1,000
Reaction score
6
Location
los angeles
i have a f23a1 motor. it was a automatic but i swapped it out to a 5 speed M.T. the only problem is my computer has a rev limiter at 5000 rpm.

would anyone recommend going p28 ob1 or just finding an obd2B manuel computer?
 

pmarinello489

New Member
Joined
Nov 25, 2009
Posts
1
Reaction score
0
Location
Long Island, NY
Only CG Parts
F23 Brake Pedal
98-00 or 01-02 MT ecu
F23 Driver side Axle
F23 Shifter
F23 Manual tranny bracket
F23 Manual tranny Mount

Any Prelude or Accord Parts (F/H Series)
Manual Transmission Complete
clutch line
Clutch Pedal Complete
Shifter Cables
Shift Boot
Shift Knob
Intermediate shaft
Your Tranny/Year Starter
8 Flywheel bolts
1 long starter bolt
Nuts and washers for shifter
nuts, washers and cotter pins for shifter cables
couple of thick washers for the master cyl
2 nuts for master cyl
nut and bolt for master cyl/pedal connection
3 c clips
year/tranny flywheel
year/tranny vss and wiring
year/tranny reverse sensor and wiring
3 bolts for intermediate shaft
clutch fluid resivoir and mount with bolts
shift fork for clutch


THE FOLLOWING PARTS ARE ACTUAL PARTS USED ON THE CG ACCORD. THIS IS JUST A REFFERENCE OF THE PARTS THAT YOU WILL NEED TO BUY. YOU CAN BUY OTHER GENERATIONS, ACCORD AND PRELUDE, PARTS EXCEPT FOR THE PARTS I LISTED ABOVE

Now when you say Only CG parts that obviously means 98-01 Parts, but when you say Any Prelude or Accord Parts (F/H Series) which years are you referring to?

Thanks so much this is a life saver writeup.
 

Deshon2688

Well-Known Member
Joined
Aug 11, 2008
Posts
821
Reaction score
2
Location
Florida
any years that were made with an F or H motor (f22, f23, h22, h23), which is pretty much any prelude, 5th gens, and other accords that used those motors
 
Back
Top