Camber help plz :(

[CG6>YourCar]

It's true that the fronts don't camber as much as the rear.

I'm at 23" in the front and 23.5" in the rear and my front camber is about -3.5, but my rears are about -4. Camber wear isn't too bad at all. I tend to drive conservatively and hardly ever take hard turns so just as long as you keep your spirited driving to a minimum, camber and tire wear, in general, shouldn't be much of an issue.

The wheels and suspension Master has spoken!

 

[truWarier02]

Thanks

But I would say Sleeper_Cell is, hands down, the Wheels/Suspension Master.

 

[CG6>YourCar]

Thanks

But I would say Sleeper_Cell is, hands down, the Wheels/Suspension Master.

I've never made contact with him, so I wouldn't know. Hopefully someday I have the honor of doing so.



EDIT: Sorry for the thread jack.

 

[JetLife]

Just springs, no dont waste your money on camber kits, get your toes adjusted and you should be fine. Just hoping you arent lowering it on stock shocks.

okay man thanks for the info. and i mean I'm thinking about just getting the springs putting them on with stock struts until they blow then just buy struts then idk though

 

[CG6>YourCar]

okay man thanks for the info. and i mean I'm thinking about just getting the springs putting them on with stock struts until they blow then just buy struts then idk though

Why would you perfer to do double the work?


You have the springs, just give it time and when you can afford struts, pair them and then install them onto the car..?

 

[JordanFleenor]

Why would you perfer to do double the work?


You have the springs, just give it time and when you can afford struts, pair them and then install them onto the car..?

This.




You can always sell your oem struts or put it all back to stock if you decide to sell.

 

[JetLife]

This.




You can always sell your oem struts or put it all back to stock if you decide to sell.

Why would you perfer to do double the work?


You have the springs, just give it time and when you can afford struts, pair them and then install them onto the car..?

wow all true, never thought of that! ill just wait until i get both springs and struts.

 

[20-CG5-01]

wow all true, never thought of that! ill just wait until i get both springs and struts.

That's going to run you about $400+ already. Shoulda just saved up for some tien basic or some type 1's.

 

[CG6>YourCar]

That's going to run you about $400+ already. Shoulda just saved up for some tien basic or some type 1's.

Way to discourage the young grasshoppa'

 

[20-CG5-01]

Way to discourage the young grasshoppa'

Just the truth lol. When you lower your car, majority if the time with springs, youll always want it lower than 1.5-2".